Three-prong clamp
CHF 16.40*
Content:
1
15 Available. Delivery time: 5-7 workdays
Product number:
6076893
Manufacturer:
Carl Friedrich Usbeck KG
Packaging information:
Length:
221 mm
Width:
50 mm
Height:
30 mm
Weight:
0.123 kg
Description
Zinc die casting, natural alloy, vinyl-coated jaws.
Properties
| Clamping range: | 0 ... 40 mm |
|---|---|
| Manufacturer Article Number: | 2801 |
| Material: | Die-cast zinc |
| Max. clamping width: | 40 mm |
| Min. clamping width: | 0 mm |
| UNSPSC: | 27-11-21-30 |
Skip product gallery
From
CHF 19.00*
From
CHF 14.20*
Other customers also bought
Carl Friedrich Usbeck KG
Carl Friedrich Usbeck KG
Swivelling bosshead
Swivelling. To DIN 12895 Part 1. Zinc die casting powder-coated .
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
Bossheads, aluminium, angle 90°
DIN 12895. With thumb screw M8/M10.
Skip product gallery
Bosshead
From
CHF 13.90*
Burette holders
From
CHF 37.20*
Bossheads, zinc die casting, with brass screws
From
CHF 10.50*
Cross bosshead, cast steel
From
CHF 15.70*
Table clamps for rods, malleable cast iron, coated
From
CHF 85.90*
Bossheads, Zinc die casting, with steel screws
From
CHF 9.40*
Rectangular retort stand bases, enamel, coated steel plate
From
CHF 40.40*
Similar products
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.
For table tops with a thickness of max. 55mm. Rod diameter 12/13mm.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".
Skip product gallery
Disposable ground joint sleeves, PTFE
From
CHF 4.10*
Screw caps for screwthread tubes, PBT
From
CHF 2.80*
Tubing Iso-Versinic
Price on request
LLG-Adapter for thermometer, borosilicate glass 3.3
From
CHF 14.95*
Customers also bought
Outstanding chemical resistance at operating temperatures from -200 to 260 °C, only 50 µm thickness, the sleeves fit like a second skin without adding bulk, without grip collar, simplifying use of joint clips.
Red. With DIN thread (GL) and aperture. temperature resistant up to 180°C.
Synthetic fluoroelastomer. Chemically resistant to hydrocarbons (aromatic and aliphatic), oils, strong acids, oxidizing agents and chlorous solvents. Excellent resistance to abrasion and flexing. Good ozone and radiation protection. Impermeable to gas and steam. Shore A, Density 1.9. Temperature range -20 °C to 200 °C (up to 300°C for short periods). Elongation at tear >250%. Suitable for transporting corrosive liquids.
Adapter for securing thermometers. With compression screw cap and O-ring.