Tube tests NANOCOLOR® ortho- and total Phosphate
CHF 140.70*
Content:
20
Delivery according to order confirmation
Product number:
4005398
Manufacturer:
Macherey-Nagel GmbH & Co. KG
Packaging information:
Length:
158 mm
Width:
105 mm
Height:
120 mm
Weight:
0.324 kg
Description
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
| Hazardous Substance Data | |
| GHS |    |
| Signal word | Gefahr |
| H-Satz | H272, H302, H315, H317, H319, H334, H335 |
| P-Satz | P210, P261sh, P264W, P280sh, P301+P312, P304+P340, P330, P342+P311, P403+P233 |
| UNNR | 3316 |
| SDS | Link |
Properties
| Description: | ortho- and total Phosphate 45 |
|---|---|
| GHS: | GHS03, GHS07, GHS08 |
| Manufacturer Article Number: | 985055 |
| Measuring range: | 5,0 - 50,0 mg/l P15 - 150 mg/l PO43- |
| UNSPSC: | 41-11-61-16 |
Skip product gallery
Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
From
CHF 107.20*
Tube tests NANOCOLOR® COD
From
CHF 114.60*
Conductivity cell probes, for PrimeLab 2.0
From
CHF 270.00*
pH electrodes for PrimeLab 2.0
From
CHF 270.00*
pH electrodes, starter kit, for PrimeLab 2.0
From
CHF 758.00*
Accessories NANOCOLOR®
From
CHF 19.20*
Accessories NANOCOLOR®, Membrane Filtration
From
CHF 146.50*
Similar products
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.DIN ISO 15705
For conductivity measurements in the laboratory.With integrated temperature sensorFor connecting to the ProbeBOX 1.0
For pH measurements of water solutions in research, environmental monitoring and quality control.Not refillableWith integrated temperature sensorFor connecting to the ProbeBOX 1.0
For pH measurements of water solutions in research, environmental monitoring and quality control.With integrated temperature sensorNot refillableAutomatic recognition of connected electrodesSynchronisation via LabCOM®, LabCOM® Cloud (optional and free of charge)ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0Scope of supply:pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual
*additional cable required**additional mains adapter required
Turbidity elimination before photometric analysis (without digestion). Sample preparation set: 2 syringes 20 ml, 25 CHROMAFIL® membrane filtersMembrane filters CHROMAFIL® without accessories* with glass fiber pre-filter, retention of coarse particles without clogging.