Viscometers ROTAVISC SBS Complete
CHF 4,324.00*
Content:
1
Delivery according to order confirmation
Product number:
4700000
Manufacturer:
IKA-Werke GmbH & Co.KG
Packaging information:
Weight:
6.35 kg
Description
Viscometers with a large range of functions to determine the viscosity of liquids in all areas of application, ranging from laboratory to quality control. The devices are suited for different viscosity ranges. With the optional software labworldsoft 6 visc, several devices can be operated at the same time, thus expanding data processing and connecting thermostats.
Equipped with advanced ball bearing technology for demanding applications such as high sample throughput or frequent spindle changes
Scope of supply: Viscometers, stand ROTASTAND, spindles SP set-2, temperature sensor PT 100.8, protective bracket
- Highest measurement accuracy
- Stepless speed adjustment
- 4.3" TFT display
- Digital level
- Simple ramp function
- With connection for ext. PT100 sensor
Scope of supply: Viscometers, stand ROTASTAND, spindles SP set-2, temperature sensor PT 100.8, protective bracket
Properties
| Depth: | 372 mm |
|---|---|
| Dimensions (WxDxH): | 351 x 372 x 629 mm |
| Height: | 629 mm |
| IP code: | IP 40 |
| Interfaces: | RS 232, USB |
| Manufacturer Article Number: | 0010013820 |
| Max. Viscosity: | 80000000 mPa·s |
| Max. speed: | 200 1/min |
| Max. torque: | 1.4374 mNm |
| Max. voltage: | 240 V |
| Min. speed: | 0.01 1/min |
| Min. viscosity: | 200 mPa·s |
| Min. voltage: | 100 V |
| Plug type: | EU/UK/CH |
| Power supply: | 100 ... 240 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Reproducibility: | 2 % |
| Speed: | 0.01 ... 200 1/min |
| Torque: | 1.4374 mNm |
| Type: | ROTAVISC SBS hi-vi I Complete |
| Type of auxiliary energy: | Mains connection |
| Viscosity: | 200 ... 80,000,000 mPa·s |
| Weight: | 7.1 kg |
| Width: | 351 mm |
Skip product gallery
From
CHF 7,535.00*
From
CHF 8,047.00*
Set
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Rotational viscometers CBC ROTAVISC SBS me-vi Package
By combining the rotational viscometer with the CBC VISC lite heating bath and circulation thermostat, the samples can be measured directly in the heating bath, ensuring accurate temperature control and precise and reliable measurement results. A second beaker (600 ml) can be pre-tempered during the measurement.Stepless speed adjustment4.3" TFT displaySimple ramp functionEnvironmentally friendly natural refrigerant R290Equipped with advanced ball bearing technology for demanding applications such as high sample throughput or frequent spindle changes.Scope of supply: Viscometer, stand ROTASTAND, bath circulator CBC visc lite, spindles SP set-2, temperature sensor PT 100.8
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Rotational viscometers ROTATEMP SBS me-vi Package
The combination of ROTAVISC viscometers and the ROTATEMP high-temperature system enables precise temperature control when measuring difficult-to-measure, highly viscous media such as asphalt, bitumen, wax, polymers, candy mass or hot-melt adhesives.Stepless speed controlFast and reliable heating to 300 °C in just 16 minutes (when using a silicone oil)Compatible with the optional labworldsoft® 6 Visc viscometer softwareEquipped with advanced ball bearing technology for demanding applications such as high sample throughput or frequent spindle changes.Scope of supply: Viscometer, stand ROTASTAND, high-performance temperature system ROTATEMP, spindles SP set-2, temperature sensor PT 100.8
Skip product gallery
From
CHF 4,798.00*
From
CHF 308.00*
From
CHF 4,145.00*
Accessories
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Cooling/heating bath circulator CBC visc lite
Designed for combination with the IKA ROTAVISC viscometers and covers a wide temperature range.A second beaker (600 ml) can be pre-tempered during the measurementOptimised water flow management in the insulated bath for fast and precise temperature control.Equipped with environmentally friendly natural refrigerant R290External pump connection for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakersEasy to maintain thanks to easily removable and therefore easy-to-clean air filters
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Adapter and spindle sets for Viscometers ROTAVISC
DIN S-1: DIN adapter set.O DIN S-1: The open DIN spindle set measures viscosities according to DIN 53019 and can be used with customer-specific vessels. The set includes a single-wall-open-jacket to quickly dive into the sample liquid as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress is included.ELVAS-1: The extremely low viscosity adapter spindle set ELVAS-1 includes a double jacket to quickly heat up or cool down the sample as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress. This 16 ml spindle is commonly used with the ROTAVISC lo-vi and allows measurements from 1 mPas (water temperature at 20 °C). The spindle without the water jacket can also be used in customer-specific vessels.VAN-1: The vane spindle set allows the viscosity measurement of suspensions. Four vane spindles are included in the delivery.T-SP-Set: Set with 6 T spindlesSAS-1: Spiral adapter to measure the viscosity of very sticky and other viscous samples. Additionally, it is possible to analyse the fluid behavior of different shear rates.SP set-1: Standard spindle set, inculdes 4 spindles (SP1, SP2, SP3, SP4).SP set-2: Standard spindle set, inculdes 6 spindles (SP7, SP8, SP9, SP10, SP 11, SP12)
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
High-temperate system ROTATEMP
For use with IKA ROTAVISC viscometers. It enables precise temperature control when measuring difficult-to-measure, highly viscous media such as asphalt, bitumen, wax, polymers, candy mass or hot-melt adhesives.Fast and reliable heating to 300 °C in just 16 minutes (when using a silicone oil)Heating oven and control unit are combined in one device with a small footprintCompatible with the optional labworldsoft® 6 Visc viscometer software
IKA-Werke GmbH & Co.KG
Skip product gallery
Immersion flow cup with fixed nozzle
From
CHF 136.00*
Dipping flow cups Frikmar
From
CHF 98.80*
Flow cups with fixed nozzle
From
CHF 258.00*
Viscometers Ubbelohde, glass, kinematic
From
CHF 619.00*
Viscometers B-ONE PLUS / FIRST PLUS
From
CHF 4,635.00*
Adapter and spindle sets for Viscometers ROTAVISC
From
CHF 308.00*
Similar products
With fixed nozzle from stainless steel or aluminium.
Aluminium. DIN 53211 viscometer. With brass nozzle or stainless steel (V2A) as indicated. For all types of liquid chemicals, varnishes, fluid enamels, gravure printing inks and leather dyes, oils, fats, foodstuffs etc. Cup volume 100ml.
With fixed nozzle made of stainless steel. Housing made of titanium anodised aluminum.
ISO 3105, DIN 51562.For manual (type 501 ..) or automatic (type 532 ..) measurements.Constants documented in manufacturer's certificate.
The rotational viscometer determines the viscosity of liquids by the torque with different measuring spindles. With the B-ONE PLUS, you can determine measurement times for thixotropic products. When entering the density of the product, the kinematic viscosity can also be determined. The viscometer is used mainly in the areas of cosmetics, pharmacy, colour production and chemistry.Delivery as a single unit or with the spindle sets L1-L4 or R2-R7.Measurement at different speedsViscosity range up to 240 000 000 mPas7" touch screenDifferent spindle setsEasy to useWide range of applicationsStable standDisplay settings: viscosity, speed, torque, measuring time, measurement geometryViscosity unit cp or mPasLanguage French, English, Russian, SpainFIRST PLUS additionally with:PT100 for accurate temperature measurementConnections for RS232, USB, LANSoftware optionalSpecificationsRotation speed:0.3 ... 250 rpmTorque range:
Torque range LR versions:0.05 ... 13 mNm
0.005 ... 0.8 mNmTemperature range FIRST PLUS:-50 ... 300 °CAccuracy:± 1 % of full scaleRepeatability:± 0.2 %Viscosity range B-ONE PLUS
with spindles L1 - L4 / R2- R7:
15 ... 22 000 000 mPas / 200 ... 240 000 000 mPasDimensions head (L x W x H):180 x 135 x 250 mmDimensions stand (L x W x H):280 x 200 x 30 mmRod length:500 mmWeight:6.7 kgPower supply90-240 VAC, 50/60 Hz
DIN S-1: DIN adapter set.O DIN S-1: The open DIN spindle set measures viscosities according to DIN 53019 and can be used with customer-specific vessels. The set includes a single-wall-open-jacket to quickly dive into the sample liquid as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress is included.ELVAS-1: The extremely low viscosity adapter spindle set ELVAS-1 includes a double jacket to quickly heat up or cool down the sample as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress. This 16 ml spindle is commonly used with the ROTAVISC lo-vi and allows measurements from 1 mPas (water temperature at 20 °C). The spindle without the water jacket can also be used in customer-specific vessels.VAN-1: The vane spindle set allows the viscosity measurement of suspensions. Four vane spindles are included in the delivery.T-SP-Set: Set with 6 T spindlesSAS-1: Spiral adapter to measure the viscosity of very sticky and other viscous samples. Additionally, it is possible to analyse the fluid behavior of different shear rates.SP set-1: Standard spindle set, inculdes 4 spindles (SP1, SP2, SP3, SP4).SP set-2: Standard spindle set, inculdes 6 spindles (SP7, SP8, SP9, SP10, SP 11, SP12)