Volumetric flasks, PFA, class A, with screw cap

Highly transparent. Class A tolerances according to DIN EN ISO 1042.
The PFA screw cap guards against contamination.
Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.
With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.
To preserve the ring mark, do not clean at temperatures exceeding 60ºC.

The advantages of PFA

Long-term maintenance of low-concentration reference materials in PFA containers
No memory effects
Practically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfaces
High thermal stability, from -200°C to +260°C
Chemical inertness against nearly all chemicals
Good transparency and dimensional stability, suitable for volumetric instruments
Easy to clean
Use of high purity raw materials

Autoclavable:	Yes
Height:	90 mm
Manufacturer Article Number:	107097
Material:	PFA
Max. temperature resistance:	260 °C
Min. temperature resistance:	-200 °C
Nominal capacity:	10 ml
Standard:	DIN EN ISO 1042
Temperature resistance:	-200 ... 260 °C
Thread:	GL 18
Tolerance:	0,04 ± ml, 0,04 ±·ml
Type of closure:	Screw cap
UNSPSC:	41121804

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Height	Manufacturer Article Number	Nominal capacity	Thread	Tolerance

Other customers also bought

VITLAB GmbH

Volumetric flasks, plastic, Class B

Highly transparent PMP. Tolarances Class B acc. to DIN EN ISO 1042. With individually adjusted, red printed graduation and inscriptions and PP standard ground joint stoppers.The volumetric flasks withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. Recommended cleaning temperature: up to 60°C to preserve printing on the flasks.

From CHF 13.80*

VITLAB GmbH

Volumetric flasks, PMP, class A

With NS stoppers, PP. Highly transparent. With ring mark individually calibrated to (IN). Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC. On request also with DAKKS calibration certificate or single certificate.

From CHF 15.20*

VITLAB GmbH

Volumetric flasks, PP, Class B, NS-stoppers PP

Ajusted to IN. Highly transparent. Class B tolerances according to DIN EN ISO 1042. Thermal stress up to 60 °C does not permanently exceed the tolerance limits. To preserve markings, do not clean at temperatures exceeding 60 °C.

From CHF 10.60*

Accessories

BRAND GMBH + CO.KG

Spare screw caps, PFA for volumetric flasks, Class A

From CHF 18.30*

Similar products

Wide-mouth bottles with screw thread, PFA

Transparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.

From CHF 185.00*

Narrow-mouth bottles Nalgene™ Type 1600, FEP with screw cap ETFE

Transparent. Teflon® FEP bottle with leakproof Teflon® ETFE screw cap. Highly resistant to chemicals, corrosion and temperature. Autoclavable - cap should be unscrewed and sat loosely on neck before autoclaving.Teflon® and Tefzel® are registered trademarks of DuPont.

From CHF 53.00*

Narrow-Mouth Bottle Nalgene™ Teflon™ PFA, with screw cap

Chemical and corrosion resistantTemperature resistant from -270 to +250 ° CLeak-proof Teflon ™ PFA screw capsAutoclavable

From CHF 60.70*

Sample tubes, PP

For IC Sample Processors and VA Autosamplers.

From CHF 474.00*

Stoppers with perforation , PP

For IC Sample Processors.

From CHF 1,775.00*

Wide-mouth bottles, PFA

For long-term storage of solvents and standards (trace analysis).PFA screw cap with integrated seal lip and buttress threadTemperature resistant from -200 ºC to +260 ºCAutoclavable

From CHF 164.50*

Narrow-mouth wash bottles, Technical quality PFA

These bottles include components made of reprocessed PFA material from our production process. The tip opening can be enlarged by cutting.High temperature and chemical resistanceETFE screw capsFEP tube

From CHF 151.50*

LLG-Beakers, low form, PTFE

Manufactured from high quality PTFE with excellent resistance to all chemicals. Manufactured from molded, pure PTFE with a smooth internal finish. Flat base enables a flat contact to the surface for effective heat transfer. PTFE beakers have excellent resistance to chemicals and temperature stability from -200°C to +260°C.

From CHF 22.70*

Griffin Beakers, PTFE

Griffin Beakers, PTFE are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 288°C when proper care is exercised. The specially molded bottom allows rapid heat transfer.Can be heated to 550°F (288°C) and used in a microwaveChemically resistant to acids and basesUltra-pure

From CHF 65.20*

Wide-mouth bottles with cap, graduated, PFA

These PFA graduated bottles have a convenient wide-mouth opening for easy filling and pouring. These unbreakable, chemically inert bottles can be used for storage of virtually all corrosive chemicals. PFA material is heat resistant, non-stick and easy-to-clean. Each includes a PFA cap with an inert fluoropolymer cap liner to ensure leak-proof sealing. Ideal for environmental sampling, or for storage in pharmaceutical and intermediate-stage semiconductor processing applications.Wide-mouth for easy fillingUltra pure and chemically inertNon-stick and easy-to-clean

From CHF 236.00*