Water bath preservative liquid Aqua Stabil

Compact design and high cooling capacity at low temperatures.Option: Natural refrigerant available on requestHeating capacity CC-505 / CC-505wl: CC-508 to CC-525w: 1.5 kW 3.0 kWPump data CC-505 to CC-525w Max. pressure: Max. suction: 25 L/min / 0.7 bar 18.5 L/min / 0.4 barSupply requirement CC-505 to CC-508w: CC-510 to CC-525w: 230 V / 50 Hz 400 V / 50 HzTemp. stability acc. to DIN 12876:+/-0.02 K*with displacement insertFunction version available by E-grade.

Exceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.Pump pressure max.: Max. suction:27 L/min / 0.7 bar 20 L/min / 0.4 barTemperature Stability to DIN 12876:0.02 KAll units use natural refrigerant as standard.*with displacement insert

Refrigerated circulators are suitable for internal and external standard temperature applications as well as routine work in laboratories and industry.Bright, white, easy-to-read displayEasy pump switching between internal and external circulationExternal pump connections (M16x1)USB connectionSpace-saving cooling coil design yields more usable space in the bath tankStainless steel bath tank including bath lid and drain tapRemovable ventilation gridRefrigeration unit without lateral ventilation openings2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1SpecificationsTemperature stability:± 0.03 °CHeating capacity:2 kWFlow rate:15 l/minPump pressure:0.35 bar

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: From -40° up to +200°CTemperature Stability: ±0.01°CIntuitive 3.75" (9.5 cm) display with touch-pad control4 languages: French, German, Spanish, EnglishPump speed variable external temperature control capabilityPump pressure max. 3.6 psi (0.25 bar)On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probeAdjustable over- or under-temperatureOn-screen promptsSafety class IIISingle-point calibration capability

Powerful circulator for routine and sophisticated low temperature applications in the laboratory. The TXF200-R4R includes the TXF200 heating circulator and an R4R tank/refrigeration unit. The refrigeration unit can be switched off independently of the circulator to allow heating-only applications.Full colour QVGA TFT displayTimer function with acoustic alarmMemory capacity for 10 programs with up to 100 segmentsChoice of languages: English, French, German, Spanish, and ItalianFloat switch protects against low liquid levelAdjustable over-temperature protectionNo spill valved front drain3 preset programsEnvironmentally friendly refrigerant (R290)Temperature range:-30 ... 100 °CTemperature stability:±0.1 °CFlow rate:22 l/minPump pressure:0.53 barTimer:1 min ... 99 h 59 min

Powerful circulators with strong heating and cooling power for operating temperatures from -25 °C to 200 °C. With speed-controlled pressure and suction pump, suitable for external applications. Very good thermal insulation, therefore particularly fast heating-up times and low heat input at low temperatures. All parameters can be read, monitored and documented via software.Connection for external Pt100 temperature sensor and external solenoid valves via Multi I/O connectionVisual and audible warning functionsUSB/RS 232 interfaceSafety drain valveAdjustable safety circuitCalibration optionCBC 5 basic With built-in LED display for controlling and monitoring the device parameters.CBC 5 control With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood.SpecificationsHeat output / cooling output: Power input:2500 W / 350 W 3000 WWorking temperature: Filing volume:-25 ... 200 °C 5 ... 7 lCooling agent:230 g R134ATemperature stability (CBC 5 basic // control):±0.02 °C // ±0.01 °CDisplay resolution (CBC 5 basic // control):0.1 °C // 0.01 °CPump flow rate:31 l/minClass / Identification acc. to DIN 12876: IP code:III / FL IP 21Dimensions (W x D x H): Power supply:275 x 490 x 690 mm 100-115 ... 230 V / 50 ... 60 Hz

Powerful circulator for routine and sophisticated low temperature applications in the laboratory. The TXF200-R52 includes the TXF200 heating circulator and an R52 tank/refrigeration unit. The refrigeration unit can be switched off independently of the circulator to allow heating-only applications.Full colour QVGA TFT displayTimer function with acoustic alarmMemory capacity for 10 programs with up to 100 segmentsChoice of languages: English, French, German, Spanish, and ItalianFloat switch protects against low liquid levelAdjustable over-temperature protectionNo spill valved front drainProgrammableTemperature range:-30 ... 100 °CTemperature stability:±0.1 °CFlow rate:22 l/minPump pressure:0.53 barRefrigerant:R404aTimer:1 min ... 99 h 59 min

Heated bath circulators with stainless steel bath for operating temperatures up to 250 °C. Easy switching between internal and external control. With integrated cooling coil and powerful pressure and suction pump in a housing made of temperature and chemical resistant plastic. The large surface of the radiator allowes for an optimum heat exchange, even heating of the medium and very fast heat-up times. The bath is easy to clean and has a drain valve with hose connection on the front for draining the bath. Can be operated with flammable liquids.Adjustable safety circuitSimple menu navigation with push buttons and rotary knobsVisual and audible warning functionsUSB/RS 232 interfaceHBC 5 / 10 basic With large, easy-to-read LED display.HBC 5 / 10 control With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood. With timer function. A solenoid valve can be connected.SpecificationsHeat output: Power input:2500 W 2650 WWorking temperature: Operating temperature min.:Amb. +10 °C ... 200 °C -20 °CTemperature stability (HBC 5/10 basic // control):±0.02 °C // ±0.01 °CDisplay resolution (HBC 5/10 basic // control):0.1 °C // 0.01 °CPump flow rate: Filing volume:31 l/min 5 ... 7 l // 8 ... 11 lClass / Identification acc. to DIN 12876: IP code:III / FL IP 21Dimensions (W x D x H) HBC 5 // HBC 10: Power supply:275 x 500 x 406 mm // 275 x 500 x 456 mm 100-115 ... 230 V / 50 ... 60 Hz

The CC-805 is a low cost alternative for low temperature applications when low power is required.Option: Natural refrigerant available on requestPump data CC-805 to CC-906w:Max. pressure: Max. suction:25 L/min / 0.7 bar 18.5 L/min / 0.4 barSupply requirement: CC-805 / CC-902:400 V 50 Hz 230 V 50 HzTemp. stability acc. to DIN 12876:0.02 K*with displacement insertFunction version available by E-grade