Water jet pumps, PP
CHF 9.40*
Content:
1
| Quantity | Unit price |
|---|---|
| To 9 |
CHF 9.40*
|
| From 10 |
CHF 8.00*
|
7 Available. Delivery time: 5-7 workdays
Product number:
7020037
Manufacturer:
BRAND GMBH + CO.KG
Length:
74 mm
Width:
73 mm
Height:
20 mm
Weight:
0.011 kg
* Specifications refer to the packaging unit
With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.
Comprises: Water jet pump, including:
Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.
Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.
Comprises: Water jet pump, including:
Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.
Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.
| Performance characteristics at 3.5 bar water supply pressure at 12°C | |
| Water consumption: | 190L/hr. |
| Ultimate vacuum: | 16 mbar |
| Flow rate at atmospheric pressure: | 400L/hr. free air |
| Manufacturer Article Number: | 159665 |
|---|---|
| Type: | Reducing adapter R 3/8" for water jet filter pump |
| UNSPSC: | 41-10-51-08 |
Other customers also bought
Lenz-Laborglas GmbH & Co. KG
Water jet pump acc. to Friedrichs-Antlinger, borosilicate glass 3.3
With spiral ejector for high suction capacity, speciications (at 4 bar water pressure): water consumption: 10 l/min, low rate: 400 ml/s, non-return safety: up to 1 kg/cm³, ultimate pressure: 16 mbar, material: borosilicate glass 3.3
Thermo Elect.LED GmbH (HaakeTC
Water jet pumps
Matt chrome-plated brass and plastic.For low pressure.Can be completely disassembled. Each pump is supplied with an intermediate adapter, which acts as a rapid coupling between the suction tubing and pump. Adapter fits tubing internal diameters between 8 and 13 mm. A short length of tubing can be attached to the discharge nozzle.Required water pressure:approx. 0.5 barWater consumption:330 L / hr.Ultimate pressure:12 mbar.
Kartell S.p.A.
Water jet pump, PP
This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning.
Similar products
With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.Comprises: Water jet pump, including:Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.Performance characteristics at 3.5 bar water supply pressure at 12°CWater consumption:190L/hr.Ultimate vacuum:16 mbarFlow rate at atmospheric pressure:400L/hr. free air
Nickel-plated brass, non-return valve, with female connection to water tap.
Kartell S.p.A.
Water jet pump, PP
This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning.
Thermo Elect.LED GmbH (HaakeTC
Water jet pumps
Matt chrome-plated brass and plastic.For low pressure.Can be completely disassembled. Each pump is supplied with an intermediate adapter, which acts as a rapid coupling between the suction tubing and pump. Adapter fits tubing internal diameters between 8 and 13 mm. A short length of tubing can be attached to the discharge nozzle.Required water pressure:approx. 0.5 barWater consumption:330 L / hr.Ultimate pressure:12 mbar.
Nickel-plated brass, non-return valve, with connection for quick coupling.
Lenz-Laborglas GmbH & Co. KG
Water jet pump acc. to Friedrichs-Antlinger, borosilicate glass 3.3
With spiral ejector for high suction capacity, speciications (at 4 bar water pressure): water consumption: 10 l/min, low rate: 400 ml/s, non-return safety: up to 1 kg/cm³, ultimate pressure: 16 mbar, material: borosilicate glass 3.3
Non-return valve, standard design, no removable parts, material: borosilicate glass 3.3
Customers also bought
Cost effective alternative to glass desiccators. Highly transparent, lightweight, shatterproof, made of polycarbonate.Silicon O-ring and specially designed 'locking clip' allows use without grease and ensures an airtight seal. Flange lock holds the bottom and the lid together during non-vacuum conditions. Three-way stopcock provides great convenience for consistent vacuum draw, vacuum release or gas exchange e.g. inert gas. Maximum vacuum of 1.3mbar (1.3 x 10-4 MPa) for more than 72 hours. Wide base provides superior stability. Hose connection outer diam. 9.5 mm.Also available in brown with UV-blocking effect for light sensitive samples.G Models will be delivered with a vacuum gauge.Included in delivery: Drying agent tray, perforated sample tray, O-ring and flange locker.
DIN ISO 24450With graduations and beaded rim
With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.Comprises: Water jet pump, including:Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.Performance characteristics at 3.5 bar water supply pressure at 12°CWater consumption:190L/hr.Ultimate vacuum:16 mbarFlow rate at atmospheric pressure:400L/hr. free air
Disposable protective glove in nitrile with enhanced comfort in use and greater chemical protection - the standard glove for the laboratory.Comfortable to wearGood tactile sensitivityTried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffsMore resilience through special formulationFor single use in applications with an increased need for safety when handling chemicalsFree from phthalates/softeners and allergenic latex proteinsEasy to don and particularly skin-friendly through special finishing processColour blue - suitable for areas subject to HACCP standardsCat. III. According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.
Environmentally friendly and cost-effective refill system for pipette tips for use with the separately available reusable LLG-Pipette tip box. The reload system saves space, reduces plastic waste, and is characterized by safe and easy handling. The pipette tips have a hydrophobic inner surface and ensure maximum sample recovery and high-precision pipetting.Colour-coded racks facilitate tip identificationWith volume graduationMetal-freeDNase- and RNase-freeAutoclavableFor research and development only.