Water jet pumps, PP
CHF 9.40*
Content:
1
| Quantity | Unit price |
|---|---|
| To 9 |
CHF 9.40*
|
| From 10 |
CHF 8.00*
|
4 Available. Delivery time: 5-7 workdays
Product number:
7020038
Manufacturer:
BRAND GMBH + CO.KG
Length:
41 mm
Width:
32 mm
Height:
22 mm
Weight:
0.009 kg
* Specifications refer to the packaging unit
With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.
Comprises: Water jet pump, including:
Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.
Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.
Comprises: Water jet pump, including:
Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.
Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.
| Performance characteristics at 3.5 bar water supply pressure at 12°C | |
| Water consumption: | 190L/hr. |
| Ultimate vacuum: | 16 mbar |
| Flow rate at atmospheric pressure: | 400L/hr. free air |
| Manufacturer Article Number: | 159670 |
|---|---|
| Type: | Reducing adapter M 22x1 for water jet filter pump (thread for screen tap) |
| UNSPSC: | 41-10-51-08 |
Other customers also bought
Lenz-Laborglas GmbH & Co. KG
Water jet pump acc. to Friedrichs-Antlinger, borosilicate glass 3.3
With spiral ejector for high suction capacity, speciications (at 4 bar water pressure): water consumption: 10 l/min, low rate: 400 ml/s, non-return safety: up to 1 kg/cm³, ultimate pressure: 16 mbar, material: borosilicate glass 3.3
Thermo Elect.LED GmbH (HaakeTC
Water jet pumps
Matt chrome-plated brass and plastic.For low pressure.Can be completely disassembled. Each pump is supplied with an intermediate adapter, which acts as a rapid coupling between the suction tubing and pump. Adapter fits tubing internal diameters between 8 and 13 mm. A short length of tubing can be attached to the discharge nozzle.Required water pressure:approx. 0.5 barWater consumption:330 L / hr.Ultimate pressure:12 mbar.
Kartell S.p.A.
Water jet pump, PP
This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning.
Similar products
With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.Comprises: Water jet pump, including:Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.Performance characteristics at 3.5 bar water supply pressure at 12°CWater consumption:190L/hr.Ultimate vacuum:16 mbarFlow rate at atmospheric pressure:400L/hr. free air
Nickel-plated brass, non-return valve, with female connection to water tap.
Kartell S.p.A.
Water jet pump, PP
This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning.
Thermo Elect.LED GmbH (HaakeTC
Water jet pumps
Matt chrome-plated brass and plastic.For low pressure.Can be completely disassembled. Each pump is supplied with an intermediate adapter, which acts as a rapid coupling between the suction tubing and pump. Adapter fits tubing internal diameters between 8 and 13 mm. A short length of tubing can be attached to the discharge nozzle.Required water pressure:approx. 0.5 barWater consumption:330 L / hr.Ultimate pressure:12 mbar.
Nickel-plated brass, non-return valve, with connection for quick coupling.
Lenz-Laborglas GmbH & Co. KG
Water jet pump acc. to Friedrichs-Antlinger, borosilicate glass 3.3
With spiral ejector for high suction capacity, speciications (at 4 bar water pressure): water consumption: 10 l/min, low rate: 400 ml/s, non-return safety: up to 1 kg/cm³, ultimate pressure: 16 mbar, material: borosilicate glass 3.3
Non-return valve, standard design, no removable parts, material: borosilicate glass 3.3
Customers also bought
Silicone rubber (VMQ), transparent, hardness 60 Shore A, food grade, temperature-resistant from -60 to +200 °C (short term up to +260 °C), suitable for peristaltic pumps. BFR XV, FDA CFR 21 õ 177.2600, EP-Europ. Pharmacopoeia / DAB, biocompatibility: Cytotoxicity (USP Class 1-6), Hemolysis, Pyrogenicity, Sensitization, Dermatological Irritation, Implantation (90 days) according to ISO 10993-1. Supplied per meter.
Conformity certified with batch IDDIN EN ISO 4788Hexagonal foot with spoutCalibrated to contain (IN)Inscriptions are printed with blue enamelBatch certificate can be downloaded from website
Tip
The LLG-proMLP single channel microliter pipettes combine high accuracy and reliability with ergonomic and extremely low force pipetting relieving stress from your hand and thumb. This high precision instrument has been built to maintain accuracy for many years making it the ideal choice for all scientific work requiring exact and reproducible pipetting.The LLG-proMLP pipettes are equipped with an adjustable eject button allowing right and left handed users to set the button* according to their preferences. The built in volume locking mechanism and competitive pricing complete these high quality precision pipettes. Available volume ranges from 0.2 µl to 10 ml.High quality Made in FranceHigh accuracy, reliability and reproducibilityExtremely light weight while the robustness still remainsPerfect ergonomics for highest comfortColour-coded push-button for quick operationExtremely low pipetting forcesBuilt-in volume locking for error-free resultsTip ejector button*, adjustable for right- and left-handed usersCompletely autoclavable at 121°CIncluding individual calibration certificate (according to EN ISO 8655)* not available for 5 ml and 10 ml pipettesScope of supply: microliter pipette, calibration tool
DIN ISO 24450With graduations and beaded rim
The WHEATON® filtering apparatus are available with fritted glass support, with stainless steel support or with PTFE support. The glass components are manufactured from WHEATON® low extractable borosilicate glass 3.3. that conforms to ASTM E 438 Type I, Class A requirements. The 25 mm filtering apparatus are designed to handle small volumes of liquids, the 47 mm filtering apparatus are suitable for volumes up to 1000 ml. The 90 mm filtering apparatus are recommended for large sample volumes, liquids with a heavy particulate load and viscous liquids when a high flow rate is required.Furthermore, the following versions are offered:Filtration assemblies with stopper connections:Designed for analysis of particulate or microbiological contaminationFor flasks with a No.2 hose connection for 1/4" (6mm) I.D. tubingFiltration assembly with standard taper 40/35 joint connection:Recommended for routine filtration of organic solvents, corrosive liquids and the removal of particulates from HPLC solventsGround glass connection eliminates phthalate contamination that can occur from silicone or neoprene stoppersDrip tip on the support bases extends below the hose connection preventing filtrate from entering the vacuum lineFor flasks with a No.2 hose connection for 1/4" (6mm) I.D. tubingFiltration assembly with GL45 thread connection:Designed to collect the filtrate directly into a standard laboratory bottleConnection to the bottle is made with a polybutylene terephthalate (PBT) cap and a PTFE-faced silicone sealing ringFor routine filtration of organic solvents or for removal of particulates from HPLC solvents.Includes a PTFE support, base for support and funnel with graduation.
Tip
DIN 168 - 1. EN ISO 4796-1. With graduations, pouring ring, PP screw cap with ISO thread.Certificates are available on request.