Accessories for shakers and mixers
Heidolph Scientific
CHF 491.00*
Content:
1
Delivery according to order confirmation
Product number:
9730222
Manufacturer:
Heidolph Scientific
Packaging information:
Weight:
0.436 kg
Description
Properties
| Description: | Adapter for 20 test tubes dia. 10 to 18mm |
|---|---|
| For: | Reax 2 |
| Manufacturer Article Number: | 549-21000-00 |
Skip product gallery
Clamps for IKA shakers and shaking incubators
From
CHF 36.50*
Flask Clamps, stainless steel
From
CHF 34.00*
Digital Orbital Shaker
From
CHF 1,969.00*
Orbital shaker KM CO2, with ribbon cable
From
CHF 2,950.00*
Fixing clip platform AS 501.4
From
CHF 1,505.00*
Orbital shaker KS 260 control
From
CHF 3,965.00*
Orbital Shaker PSU-10i
From
CHF 1,124.00*
Similar products
Clamps for safe shaking of Erlenmeyer flasks.
Clamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.
Electronically controlled and programmable shakersSlow, soft-start greatly decreases the risk of spillsErlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber stripsDigital LCD display for speed and run time controlIntegrated overload shutdownPermanent motor feedback, which automatically adjusts the speed even if the load is changed during operationContinuous mode or timer for up to 49 hoursSoft rubber feet minimise system movementPlatform with non-slip surfacePlatform capacity:Erlenmeyer Flasks e.g.: 25 x 50 ml, 16 x 125 ml, 9 x 250 ml, 4 x 500 ml, 4 x 1000 ml, 1 x 2000 mlBeakers e.g.: 36 x 50 ml, 25 x 100 ml, 16 x 250 ml, 9 x 400 ml, 4 x 1000 mlDeep well assay plates e.g.: 6 x standard (more if stacking is an option)Supplied with: Orbital Shaker incl. universal attachment, universal power supply, non-slip rubber mat and 8 elastic ties
Stainless steel shaker with orbital shaking motion was specially designed for use in incubators with up to 20 % CO2 concentration and 95 % humidity. This shaker is therefore ideal for the development of cell cultures.Timer 1 s to 99 h 59 min or continuous operationExternal control unit with digital display for operation outside the incubatorScope of supply: Shaker incl. basic platform with rubber mat and external control unitDue to the ribbon cable, a feed-through in the incubator is not necessary.
For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25 ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)Without spring clips.
Compact, low-level, platform shaker with highly effective, orbital motion, maximum capacity 7.5 kg. Large selection of attachments enable use with a wide variety of vessel shapes and sizes. Electronic speed control and timer adjustment.Attachments are not included - Please order separately.Separate digital speed and timer displays with operating mode indicationTimer: 1 min to 99 h 59 min or continuous operationControlled stop-point positioning function (enables use in automated robotic sampling routines)All functions can be controlled and documented using labworldsoft® softwareInterface: RS 232 / analogueSpecial variant with reverse rotation function available on request
Microprocessor controlled shaking platform providing smooth and quiet horizontal orbital motion for mixing in bottles, flasks and beakers.Continuous or timed operation (1 min to 96 h) with automatic switch-offReliable direct drive systemAutomatic load balancing systemThe five interchangeable accessory platforms enable a wide choice of vessels to be used, including bottles, flasks and beakers, dishes, boxes and petri-dishes