Skip to main content Skip to search Skip to main navigation
Menu

BOD-Measurement-System BD 600

Description
Die BSB Bestimmung ist ein wichtiges Instrument zur Ermittlung des Einflusses von häuslichen und industriellen Abwässern auf Kläranlagen und Vorfluter. Das Sensorsystem BD 600 ermöglicht die exakte und komfortable Bestimmung des Biochemischen Sauerstoffbedarfs (BSB) nach dem respirometrischen Prinzip. Der verbrauchte Sauerstoff wird hierbei über eine Druckminderung im geschlossenen BSB-Messsystem ermittelt. Durch den Einsatz moderner Drucksensoren kann auf die Verwendung schädlichen Quecksilbers gänzlich verzichtet werden. Das Messsystem BD 600 erfasst unabhängig von der Messdauer jede Stunde einen Messwert. Auf diese Weise lässt sich frühzeitig die Qualität einer Messreihe beurteilen. Sowohl Momentanwerte als auch gespeicherte Werte können jederzeit abgefragt werden. Gespeicherte Werte werden wahlweise numerisch oder grafisch angezeigt. Das Gerät ist fernbedienbar. Nach dem Start einer Messreihe werden die BSB-Messwerte in regelmäßigen Zeitintervallen automatisch gespeichert. Diese können jederzeit in mg/l BSB auf dem großen Display angezeigt werden ohne dass ein umständliches Umrechnen über Faktoren erforderlich ist. So können auch Messreihen, die beispielsweise an einem Sonntag enden, problemlos in der folgenden Woche ausgewertet werden. Die Messreihen können auf einem Speichermedium (USB-Stick, SD-Karte) in einer Datei gespeichert, bzw. per USB-Kabel übertragen werden und auf einem Computer weiter ausgewertet werden.Für unterschiedliche Anwendungen ist der Messzeitraum frei zwischen 1 und 28 Tagen wählbar. Während Kurzzeitmessungen für wissenschaftliche Anwendungen von Nutzen sind, erstrecken sich reguläre BSB-Messung über einen Zeitraum von 5 Tagen. Eine respirometrische Messung über einen Zeitraum von 28 Tagen kommt beispielsweise bei der OECD Bestimmung zum Zuge.

  • Messprinzip: Respirometrischer, elektronischer Drucksensor

  • Messbereiche: 0 - 40, 0 - 80, 0 - 200, 0 - 400, 0 - 800, 0 - 2000, 0 - 4000 mg/l O2

  • Einsatzgebiete: BSB 5/ BSB F/ OECD301F

  • GLP konform


Lieferumfang:
  • BD 600, komplett mit 6 Sensoren und Steuerungseinheit mit Batterien

  • Netzteil inkl. Y-Kabel zur gemeinsamen Stromversorgung des BD 600 und des Rührsystems

  • Induktiv-Magnetrührsystem

  • 6 Probenflaschen

  • 6 Köcher

  • 6 Rührstäbe

  • 1 Überlaufmesskolben, 157 ml

  • 1 Überlaufmesskolben, 428 ml

  • 1 Flasche, 50 ml Kaliumhydroxid-Lösung

  • 1 Flasche, 50 ml Nitrifikationshemmstoff

  • 1 Bedienungsanleitung

  • Fernbedienung

Properties
Battery/rechargeable battery: 3 x C, AlMn
Depth: 230 mm
Designation ANSI: C
Dimensions (WxDxH): 181 x 230 x 375 mm
Electrochemical system: AlMn
Height: 375 mm
IP code: IP 51
Manufacturer Article Number: 2444461
Max. voltage: 240 V
Measuring time: 28 d
Min. voltage: 100 V
No. of batteries/rechargeable batteries: 3
No. of measuring positions: 6
Power supply: 100 ... 240 V, 50/60 Hz
Power supply frequency: 50/60 Hz
Type: BD 600 GLP
Type of auxiliary energy: Battery/mains connection
Width: 181 mm
Skip product gallery

Zubehör

New

Tintometer GmbH

Tintometer GmbH
Gummiköcher für BSB-Messsystem BD 600/606
From CHF 10.60*
New

Tintometer GmbH

Tintometer GmbH
BSB-Probenflasche
From CHF 15.80*
New

Tintometer GmbH

Tintometer GmbH
Chemikalien für BSB-Messsystem BD 600/606
From CHF 17.70*
Skip product gallery

Similar products

Dissolved oxygen bottles, Winkler pattern
Winkler pattern. Soda-lime glass.For determination of dissolved oxygen in water. The measured capacity is specified to ± 0,01ml. With white labelling area. Solid, bevelled glass stopper, secured with an accessory spring clip. Each bottle is adjusted to the relevant stopper. Stoppers and bottles are therefore not interchangeable. Each bottle and its stopper is marked with a unique, matching identification number.
From CHF 17.40*

Thermostatic cabinets TC, with steel door
The incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °CLow power consumptionIlluminated LED display of preset and current temperaturesWith natural refrigerant R600aIdeal for BOD determination at 20 °CPower sockets inside the incubatorThe incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °CLow power consumptionIlluminated LED display of preset and current temperaturesWith natural refrigerant R600aIdeal for BOD determination at 20 °CPower sockets inside the incubator
From CHF 2,565.00*

Overflow Measuring Flask for OxiTop®
Glass measuring flask with fixed volume doses for the easy and accurate measurement of the required sample volume for respirometric BSB measurements.
From CHF 68.30*

BOD bottles with stoppers
With NS 19 cone glass stopper.
From CHF 27.00*

BOD sensor system
Measuring systems for the reliable determination of 90 to 999 ppm BOD. Complete with sensor heads and multi-position magnetic stirrer.The sensor heads are screwed directly onto the BOD bottlesAutomatic storage of 5 results in 24-hour intervalsMeasured readings in mg/l (ppm) can be read directly on the sensor at any timeProtected against splashing water (IP 54)Scope of supply BOD sensor system 6: 6-position magnetic stirrer, each 6 BOD sensors incl. batteries, 500 ml brown glass bottles, KOH reservoirs and magnetic stirring rodsScope of supply BOD sensor system 10: 10-position magnetic stirrer, each 10 BOD sensors incl. batteries, 500 ml brown glass bottles, KOH reservoirs and magnetic stirring rodsSpecificationsBOD range:90 ... 999 ppmDisplay:LED (3 digits)IP code:IP 54
From CHF 196.70*