Clamp R 200 for Disperser T 10 ULTRA-TURRAX®
Product number:
6225158
Manufacturer:
IKA-Werke GmbH & Co.KG
Packaging information:
Length:
184 mm
Width:
153 mm
Height:
85 mm
Weight:
0.082 kg
Description
Properties
| Manufacturer Article Number: | 0003372000 |
|---|---|
| Shaft length: | 130 mm |
| Shaft Ø: | 8 mm |
| UNSPSC: | 27-11-21-00 |
Skip product gallery
Dispersing heads for T 18 ULTRA-TURRAX® series
From
CHF 387.40*
Disperser System ULTRA-TURRAX® Tube Drive
From
CHF 880.10*
Dispersing heads for T 25 ULTRA-TURRAX® series
From
CHF 387.40*
Stands for Homogenisers POLYTRON®
From
CHF 27.50*
Dispersing heads for Homogeniser POLYTRON®
From
CHF 538.00*
Disperser System ULTRA-TURRAX® Tube Drive P control
From
CHF 1,917.00*
High-power homogeniser T 50 digital ULTRA-TURRAX®
From
CHF 4,988.00*
Homogenisers T 25 easy clean digital
From
CHF 2,793.00*
Similar products
Plastic dispersing heads: AutoclavableStainless steel dispersing heads: Ultimate fineness emulsions 1 to 10 µm and suspensions 10 to 50 µm, sterilisable by all methods.
Disperse, stir and grind using a single drive unit. Patented disposable disperser system for volumes from 2 to 50 ml with hermetically sealable, disposable sample tubes. Provides protection and safety from: Infectious samples, toxic substances, strong-smelling materials.No possibility of cross-contaminationSuitable for individual or serial operationsIncreased safety due to low voltage (24 V) powerChemically resistant plastic containersAnti-locking functionScope of supply: Device incl. removal hook for removing the rotor-stator unitDispersing tubes (20 and 50 ml) with pierceable membrane and γ-sterilised are available on request.
Plastic dispersing heads: Autoclavable. Stainless steel dispersing heads: Ultimate fineness: emulsions 1µm to 10µm and suspensions 5µm to 50µm, sterilisable by all methods. ST tools are recommended for use with tissue and other fibrous materials.
HS 1200 E: Holder for the support of drive, transformer, four dispersing aggregates and two tools.ST-P 13/320: Stainless steel plate stand with anti-slip mat made of silicone, with height-adjustable holder for the drive and for fastening the base station.ST-P 01/200: Stainless steel joint stand (gas spring) with two rivet plugs for safe fixing of the basic station The drive holder can be rotated in any direction, raised and lowered.ST-P 15/320: Stainless steel plate stand with height-adjustable holder for drive support and for safe fixing of the basic station.ST-P 20/600: Plate stand with two rod design. Height adjustable.ST-P 10/600: Plate stand with one rod design. Allows easy and safe height adjustment of the drive unit. Material: AluminumST-F 10/600: H-foot stand made of anodized aluminum and the height adjustable, swiveling PTFE-coated work table with vessel holder. Material: AluminumST-P 14/590+500: Electric plate stand with lifting telescopic bar for more ease of use. Incl. up/down button and mat to prevent slipping. Stroke 500 mm. The electronics are designed for ambient temperatures of +5°C to +40°C and were tested per EN 60335-1 and UL 962.ST-P 21/700: Stainless steel plate stand with two rod design. Height adjustable. For more safety, the drive unit cannot be twisted sidewise or rotated.*with optional adapter
Type addition EC (STANDARD DISPERSING HEADS): The universal geometry uses two rows of teeth, is suitable for a large spectrum of laboratory applications, and it is reliable and efficient.Type addition BEC: High-turbulence mixing head, suitable for suspension of solid particles and for high viscosity applications.Type addition W: Dispersing head for fibrous and tough materials.Type addition SYN (SYNTHETICS): Disposable dispersing heads for theprocessing of multiple samples per day, where the required sterilization of stainless steel dispersing heads represents a significant time limitation. Available in PES / Special POM. Sterile packed.Type addition E: Coupling type EType addition F: Coupling type F*sterile
Powerful motor for the best stirring, dispersing, grinding and homogenisation results, especially suitable for safe processing of infectious, toxic or odour-intensive samples.USB interface for experiment control and documentationCollecting tray for protection against leaking liquidsSimple, precise and multilingual menu navigation with OLED displayProgrammable sample conditions (library)Tubo button for short-term, intensive mixing, dispersing and grindingAdjustable reverse operationScope of supply: Device, removal hook, plastic hose for drainage, USB cable, power adapter
Powerful dispersing instrument for volumes from 0.25 to 30 l (H2O) with digital speed display. It offers a wide speed range from 600 to 10000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.Digital speed displayElectronic speed controlElectronic overload protectionStainless steel dispersing elements can be cleaned quickly and easilySmooth startError code displayDispersing heads must be ordered separately.
High-performance homogeniser with electronic speed control and a large variety of dispersing heads for many fields of applications. In combination with an IKA laboratory reactor it is also possible to conduct dispersion tasks under vacuum or pressure.Quick and easy cleaning of the dispersing tools, no disassembling requiredBrushless motor guarantees dust-free and silent operationUSB interface for control and documentation via labworldsoft®Timer/counter functionIncreased safety through tool recognition and IP-CodeDispersing heads must be ordered separately. All existing S 25 dispersing elements are compatible with T 25 easy clean digital.