Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
CHF 815.00*
Content:
1
Delivery according to order confirmation
Product number:
4686966
Manufacturer:
Water-i.d. GmbH
Packaging information:
Description
For conductivity measurements of purified and ultra-pure water.
- Glass electrode, 7 x 18 mm platinum
- With integrated temperature sensor
- For connecting to the ProbeBOX 1.0
Properties
| Cell constant: | 0.1 1/cm |
|---|---|
| Conductivity: | 0 ... 200 μS/cm |
| Manufacturer Article Number: | PL2SP-ELECLRGL |
| Material shaft: | Glass |
| Max. temperature: | 80 °C |
| Min. temperature: | 0 °C |
| Temperature: | 0 ... 80 °C |
| Temperature sensor: | NTC 30 kOhm |
Skip product gallery
From
CHF 92.40*
Accessories
Water-i.d. GmbH
Water-i.d. GmbH
Conductivity calibration solutions
Disposable bags for effective calibration. Traceability according to NIST.
Skip product gallery
Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
From
CHF 107.20*
Tube tests NANOCOLOR® ortho- and total Phosphate
From
CHF 133.40*
Tube tests NANOCOLOR® COD
From
CHF 114.60*
pH electrodes, starter kit, for PrimeLab 2.0
From
CHF 758.00*
Conductivity cell probes, for PrimeLab 2.0
From
CHF 270.00*
pH electrodes for PrimeLab 2.0
From
CHF 270.00*
Similar products
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.DIN ISO 15705
For pH measurements of water solutions in research, environmental monitoring and quality control.With integrated temperature sensorNot refillableAutomatic recognition of connected electrodesSynchronisation via LabCOM®, LabCOM® Cloud (optional and free of charge)ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0Scope of supply:pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual
For conductivity measurements in the laboratory.With integrated temperature sensorFor connecting to the ProbeBOX 1.0
For pH measurements of water solutions in research, environmental monitoring and quality control.Not refillableWith integrated temperature sensorFor connecting to the ProbeBOX 1.0