Conductivity meter SevenDirect™ SD30

Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and ChinaConductivity:0.00 µS/cm ... 500.0 mS/cmResolution (conductivity):0.01 µS/cm / 0.1 µS/cm / 1 µS/cm / 0.01 mS/cm / 0.1 mS/cmAccuracy (conductivity):±0.5 % of measured valueTDS:0.00 ppm ... 500.0 pptResolution (TDS):0.01 ppm / 0.1 ppm / 1 ppm / 0.01 ppt / 0.1 pptAccuracy (TDS):±0.5 % of measured valueSalinity:0.00 ... 80.0 pptResolution (salinity):0.01 ppt / 0.1 pptAccuracy (salinity):±0.5 % of measured valueTemperature:-5.0 ... 105.0 °CResolution (temperature):0.1 °CAccuracy (temperature):±0.3 °C

The meter kits are suitable for measuring the conductivity of samples and can be used in a wide range of laboratory areas.Conductivity meter SD30 with large 7" touch screen and Intelligent Sensor Management (ISM®)Conductivity sensor InLab® 741-ISM with stainless steel shaft and NTC 30 kΩ temperature sensor. The 2-pole measuring cell made of stainless steel is particularly suitable for measuring samples with low conductivityScope of supply: Conductivity meter SevenDirect™ SD30, electrode arm EasyPlace™, conductivity sensor InLab® 741-ISM, 2 conductivity standard sachets 84 µS/cm, protective cover, power supply, get-started-guide

Suitable for the following Mettler Toledo instruments:RS-P25, RS-P26, RS-P28: SevenExcellence™, SevenCompact™, FiveEasy Plus™, SevenMulti™RS-P26, RS-P28: SevenGo pro™, SevenGo pro Duo™, Densito, Refracto, SevenEasy™Supplied with: Printer, power cable (country specific), interface cable, paper roll (1 pcs), ribbon cartridge (1 pcs)FeaturesFor modelBuilt-in real-time clock, Zero/Tare key:RS-P26, RS-P28Statistic application, totalling application:RS-P28RS232 Schnittstelle:RS-P25, RS-P26, RS-P28Printer unit:Dot matrix printerRibbon cartridge:Exchangeable, black inkPaper roll:Standard paper 57.5 mm (W), max. Ø 60 mmPrint quality:Thermally stable and lightfast paper (GxP)Interface:RS232C, 9pin male connector or USB* (*SevenExcellence ONLY)Dimensions (W x D x H):120 x 203 x 73mmNet weight:740g (paper roll included)

Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, conductivity electrode CONSEN9501D, conductivity standard 1413 µS/cm, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and ChinaConductivity:0.00 µS/cm ... 500.0 mS/cmResolution (conductivity):0.01 µS/cm / 0.1 µS/cm / 1 µS/cm / 0.01 mS/cm / 0.1 mS/cmAccuracy (conductivity):±0.5 % of measured valueTDS:0.00 ppm ... 500.0 pptResolution (TDS):0.01 ppm / 0.1 ppm / 1 ppm / 0.01 ppt / 0.1 pptAccuracy (TDS):±0.5 % of measured valueSalinity:0.00 ... 80.0 pptResolution (salinity):0.01 ppt / 0.1 pptAccuracy (salinity):±0.5 % of measured valueTemperature:-5.0 ... 105.0 °CResolution (temperature):0.1 °CAccuracy (temperature):±0.3 °C

A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888.Scope of supply: Conductivity meter, conductivity measuring cell TetraCon® 325, 0.01 mol/l KCl conductivity standard, stand, manual, batteries, universal power supply, CD-ROM with software, USB cable

Conductivity measurement with reliable documentation. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888. An integrated thermal printer (58 mm width) is ready for printout of the measured data.Scope of supply: Conductivity meter with integrated printer, stand, manual, batteries, universal power supply, CD-ROM with software, USB cable

Meter for accurate and reliable analysis of conductivity, TDS, salinity, resistivity and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (conductivity, TDS)1- to 2-point temperature calibration1-point salinity calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Conductivity meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China

The meter kits are suitable for measuring the conductivity of samples and can be used in a wide range of laboratory areas.Conductivity meter SD30 with large 7" touch screen and Intelligent Sensor Management (ISM®)Conductivity sensor InLab® 731-ISM with epoxy shaft and NTC 30 kΩ temperature sensor. The 4-pole measuring cell made of graphite eliminates polarisation effects and ensures high linearity over a wide conductivity rangeScope of supply: Conductivity meter SevenDirect™ SD30, electrode arm EasyPlace™, conductivity sensor InLab® 731-ISM, 2 x 2 conductivity standard sachets 1413 µS/cm and 12.88 mS/cm, protective cover, power supply, get-started-guide

These economy Conductivity meters offer years of reliable, accurate and consistent performance. User-friendly features make the instrument an ideal research partner in laboratories, production plants and schools.Large screen that displays conductivity or TDS readings with temperature in °C or °FReady indicator lets you know when readings are stableSelectable cell constantMemory holds up to 100 data pointsAuto-ranging across 5 conductivity and TDS rangesIntegral electrode holderAdditional features CON2700Extended memory holds up to 500 data points, time and date-stamped for GLP complianceReplatinization in 5 minutes with the built-in replanitization circuitIndication of necessary recalibrationAuto-logging function for convenient continuous monitoringPassword protection for setup and calibrationSalinity and Resistivity measurementsScope of supply: Meter with integral electrode holder, conductivity probeSpecificationsConductivity range (CON2700):0.050 µS … 500.0 mSResolution:0.01 µS / 0.1 µS / 1 µS / 0.01 mS / 0.1 mSAccuracy:±1 % full scaleConductivity calibration:Auto / manual, up to 5 pointsTDS range (CON2700):0.050 ppm … 500000 ppmResolution:0.01 / 0.1 / 1 / 10 / 100 ppmAccuracy:±1 % full scaleTDS calibration:Auto / manual, 5 points per rangeSalinity range (CON2700 only): Resolution: Accuracy:0 ... 80000 ppm 0.01 / 0.1 / 1 / 10 / 100 ppm ±1 % full scaleSalinity calibration:Manual, 1 pointTemperature range: Resolution: Accuracy:0.0 … 100.0 °C 0.1 °C ±0.5 °CPower supply:100 .. 240 V adapterDimensions (W x L x H): Weight:155 x 175 x 69 mm 650 gIP code: Warranty:IP 54 3 years on the meter

Due to the intuitive operation and robust aluminum housing the conductivity meter LAB 945 is perfect for training and routine purposes.Made in GermanyUSB InterfaceData logger (storage of up to 4000 entries: Date, time, main measured value, secondary measured value, measured temperature) with adjustable intervalNummerical password protectionSelectable user language (German, English, French and Spanish)Configurable turn-off timeSturdy aluminium housingGraphic LCD display, backlitScope of supply: Conductivity meter, stand, mains adapter