EPPI pestle, PP
CHF 224.50*
Content:
1
Delivery according to order confirmation
Product number:
9197691
Manufacturer:
schuett-biotec GmbH
Packaging information:
Length:
72 mm
Width:
54 mm
Height:
50 mm
Weight:
0.022 kg
Description
For resuspending pellets and homogenising within tubes (1.5, 2.0ml, exact fit). Autoclavable. Suitable for homogeniser/motor drive.
Properties
| Description: | Quick change chuck for EPPI pistol |
|---|---|
| Figure: | 3 |
| Manufacturer Article Number: | 3200612 |
| Material: | PP and stainless steel |
Skip product gallery
From
CHF 192.60*
Accessories
BRAND GMBH + CO.KG
BRAND GMBH + CO.KG
PCR tubes strips, PP, with attached single caps, 1 ridge
The extra-thin walls allow for even heat transfer during the process of heating and cooling for short cycle times. BIO-CERT® PCR QUALITY, free of DNase, DNA, RNase and endotoxins.The caps seal the vessels reliably, effectively protecting your samples from evaporation and contamination. They are easy to open and close. The highly transparent cap makes them ideal for a quantitative Real Time PCR.
DWK Life Sciences GmbH (Kimble)
Skip product gallery
From
CHF 447.80*
Other customers also bought
schuett-biotec GmbH
schuett-biotec GmbH
Homogenisers with PTFE or glass pestles
For use with all homogeniser drive-units or for schuett homgenplus.Homogenisers and pestles provide a precise shape and are consequently separately exchangeable. Clearance between pestle and homogeniser is between 0.18 and 0.23 mm.Homogeniser with PTFE pestleTapered or cylindrical. Shaft made of stainless steel. Inert. Elastic. With smooth, wax-like, moisture-rejecting surface. Resistant against high temperatures. Also available as glass fiber reinforced model. Highly efficient with especially tough tissue.Homogeniser with glass pestleTapered or cylindrical. With robust glass shaft. Ground-glass surface in cylindrical/tapered part. Highly efficient with tough tissue.Homogenizers and pestles also available individually as spare parts.Glass mortar Type 1:With flared overflow neck and spout, conicalGlass mortar Type 2:Without flared overflow neck, cylindricalGlass mortar Type 3:With flared overflow neck and spout, cylindricalGlass mortar Type 4:Round bottom, with flared overflow neck, without spout, cylindrical*glass-fibre reinforced
Skip product gallery
LLG-Micropestles, stainless steel
From
CHF 49.90*
Disposable pellet pestles, PP
From
CHF 158.00*
Disposable pellet pestles, PP, with reaction tube
From
CHF 192.00*
Dounce homogenizers
From
CHF 233.00*
Homogenisers, Dounce, glass
From
CHF 465.00*
Glass mortar for dounce homogenizers
From
CHF 100.00*
Potter-elvehjem homogenisers, Borosilicate glass
From
CHF 147.00*
Micro pestles, CTFE / stainless steel
From
CHF 197.00*
Homogenisers, Mini series, borosilicate glass 3.3
From
CHF 113.00*
Similar products
Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.For Reaction tubes:For homogenisation of cells, tissues or foodstuffs / feed samples.For tubes with 0.5 ml, 1.5 ml, and 2.0 mlCan be cooled down to -196 °CSterilisable in an autoclave or dry heat at 200 °CSuitable for PCR applicationsAlternative to single-use plastic pestlesPerfectly suitable for Eppendorf Safe-Lock Tubes
Autoclavable. Suitable for battery-operated drive motor.
Autoclavable. Suitable for battery-operated drive motor.
Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:For pre-grindingFor fine grindingSpare components are available and are completely interchangeable.
For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.
Suitable if the nuclei are to be maintained after homogenising.
Potter-elvehjem homogenisers are designed to work with soft tissuePrecision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityPTFE PestleStandard stainless steel rod for use with an electric motorOptional stainless steel handle for manual grindingAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.076 to 0.126mm
Reusable, for 500µl and 1.5ml reaction tubes. Autoclavable CTFE / stainless steel. Suitable for battery-operated drive motor (9.314 496).
Manufactured from high quality borosilicate glass this range of mini homogenisers is ideal for micro tissue work. Bodies are clear precision glass. Pestles have ground glass working length. With or without handles. Fully autoclavable.Grinding clearance pestle and mortar 0.152mm to 0.254mm.