Immersion circulator CORIO™ CD
CHF 1,281.00*
Content:
1
Delivery according to order confirmation
Product number:
4658066
Manufacturer:
Julabo GmbH
Packaging information:
Length:
452 mm
Width:
274 mm
Height:
325 mm
Weight:
3.82 kg
Description
With a few simple steps you can install a pump set onto the CORIO™ CD immersion circulator. In no time at all, the circulator is ready for temperature control of an external application.
- Precise temperature control
- Bright, white, easy-to-read display
- Whisper quiet
- Easy operation
- For bath tank up to 50 litres
- Pump change-over between internal and external circulation
- Powerful, continously variable pump
- USB interface
- Timer: 0 to 999 min
- Class III (FL) according to DIN 12876-1
Properties
| Amperage: | 10 A |
|---|---|
| Depth: | 160 mm |
| Dimensions (WxDxH): | 132 x 160 x 366 mm |
| Heating capacity: | 2 kW |
| Height: | 366 mm |
| IP code: | IP 21 |
| Immersion depth: | 166 mm |
| Manufacturer Article Number: | 9012000 |
| Max. delivery pressure: | 0.35 bar |
| Max. flow rate: | 15 l/min |
| Max. immersion depth: | 166 mm |
| Max. temperature: | 150 °C |
| Max. voltage: | 230 V |
| Min. temperature: | 20 °C |
| Operation: | Membrane keyboard |
| Plug type: | EU |
| Power supply: | 230 V, 50 Hz , 10 A |
| Power supply frequency: | 50 Hz |
| Temperature: | 20 ... 150 °C |
| Temperature stability: | ±0,03 °C |
| Type: | CORIO™ CD |
| Type of auxiliary energy: | Mains connection |
| Type of display: | LED |
| Weight: | 2.6 kg |
| Width: | 132 mm |
| With timer: | Yes |
Skip product gallery
From
CHF 317.00*
From
CHF 387.00*
From
CHF 34.30*
From
CHF 270.00*
Accessories
Julabo GmbH
Julabo GmbH
Temperature hoses, stainless steel 1.4404, single insulation
Temperature hoses with special single insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection. Max. pressure 6 bar (at 20 °C), 4.6 bar (at 200 °C).
Julabo GmbH
Julabo GmbH
Stainless steel bath tanks for immersion thermostats CORIO™ C/CD
Stainless steel bath tanks (insulated) for immersion thermostats CORIO™.
Julabo GmbH
Julabo GmbH
Water bath preservative liquid Aqua Stabil
Prevents build-up of algae and bacteria in bath tanks providing hygienic operationNo contamination of the tank or immersion thermostat componentsEconomical - only 2 ml of Aqua Stabil is required for every 1 litres of waterRemains effective for weeks, as shown by colour indicator.Use biocides safely. Always read the labelling and the product information before use.
Julabo GmbH
Julabo GmbH
Transparent bath tanks for immersion thermostats CORIO™ C/CD, PC
Transparent bath tanks made of PC for immersion thermostats CORIO™.
Skip product gallery
From
CHF 2,305.00*
From
CHF 1,107.00*
Other customers also bought
Julabo GmbH
Julabo GmbH
Thermoregulators CORIO™ CP
CORIO™ CP thermoregulators are capable to control the temperature of external applications in combination with an optional pump set. Suitable for bath vessels with a volume of up to 50 l.For internal and external applications (accessories required)Bright, white, easily visible display, even from a distanceVery quietEasy operationLow-level warning systemPump switch for internal and external circulationPowerful, continously variable pumpUSB connectionRS232 interfaceClass III (FL) according to DIN 12876-1Scope of supply: Thermoregulator, mains power cable, bath attachment clamp
Julabo GmbH
Julabo GmbH
Immersion circulator CORIO™ C
The immersion circulator CORIO™ C is the basic model of the CORIO™ circulator portfolio. The bath attachment clamp is included in delivery and facilitates mounting of the circulator on any bath tank up to 30 litres.Precise temperature controlFor internal standard applicationsBright, white, easy-to-read displayEasy operationFor bath tank up to 30 litresTimer: 0 to 999 minClass I (NFL) according to DIN 12876-1
Skip product gallery
Heating circulators
From
CHF 2,540.00*
Heating circulator bath DYNEO™ DD-BC
From
CHF 3,881.00*
Test tube racks for heating and refrigerated circulators MAGIO™/DYNEO™/CORIO™
From
CHF 127.00*
Heated circulating bath with stainless steel tank Optima™ T100-ST series
From
CHF 1,743.00*
Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™
From
CHF 76.80*
Thermostatic controller Optima™ TC120
From
CHF 1,559.00*
Heating bath circulator CORIO™ CD-BT, with transparent bath tank
From
CHF 1,903.00*
Similar products
Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.Temperature range
CC-104A/KISS-104A:
CC-202C/KISS-202C:
(15) 25 to 100 °C
(-30) 45 to 200 °CTemp. Stability to DIN 12876
CCmodels:
KISS models:
0.02 K
0.05 KSafety class:FL, IIIBath depth:150 mmHeating capacity:2 kW
For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.
Test tube racks made of stainless steel.Suitable for heating circulators with the bath types BC4, BC6, B5, BT5 and refrigerated circulators with the bath types 200F, 201F, 300F, 310F, 450F.
Universal use with precise temperature control for simple applications in a setting range from 0 to 100 °C.3 programmable temperature presetsLow liquid protection and fixed over temperature cut-outVisual alarm in case of malfunctionsClear, bright, 4 digit LED displayThermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tankScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
Test tube racks made of plastic.Suitable for heating thermostats CORIO™ C and CD with the bath types B13, B17, B19, BT19, B27, BT27, B33.
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.Clear, bright 4 digit LED display3 programmable temperature pre-setsVisual and audible alarmTimer from 1 min to 99 h 59 min2 point recalibrationAdjustable over temperature cut-outPump for external circulationFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Heating bath circulator for internal and external temperature applications with transparent bath tank and pump connections.Bright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionClass III (FL) according to DIN 12876-1