Kälte-Wärme-Umwälzthermostat HRC 2 GREEN basic
CHF 8,199.57*
Content:
1
Delivery according to order confirmation
Product number:
4714302
Manufacturer:
IKA-Werke GmbH & Co.KG
Packaging information:
Description
Das kompakte Kälte-Wärme-Umwälzthermostat überzeugt durch einem Arbeitstemperaturbereich von -30 bis 100 °C sowie der leistungsstarken stufenlos regelbaren Druck- und Saugpumpe. Der mit natürlichem Kältemittel betriebene bedarfs- und drehzahlgeregelte Verdichter erreicht eine hohe Energieeffizienz. Die Isolierung des Bad-Reservoirs ermöglicht schnelle Aufheizzeiten und reduziert den Wärmeintrag bei tiefen Temperaturen.
Das kompakte Kälte-Wärme-Umwälzthermostat überzeugt durch einem Arbeitstemperaturbereich von -30 bis 100 °C sowie der leistungsstarken stufenlos regelbaren Druck- und Saugpumpe. Der mit natürlichem Kältemittel betriebene bedarfs- und drehzahlgeregelte Verdichter erreicht eine hohe Energieeffizienz. Die Isolierung des Bad-Reservoirs ermöglicht schnelle Aufheizzeiten und reduziert den Wärmeintrag bei tiefen Temperaturen.
- Bedarfgesteuertes Kühlaggregat
- Natürlichhes Kältemittel R290
- Drehzahlgeregelte Pumpe aus PEEK
- Digitale Füllstandsanzeige
- Integrierter Einfülltrichter und Ablassventil zur sicheren und sauberen Handhabung des Thermofluids
- 2,5 l Thermofluid sind ohne Nachfüllen verfügbar
- Leicht zu reinigender Maschen-Luftfilter aus Edelstahl
- Einstellbarer Temperatur-Sicherheitskreis
- RS 232- und USB-Schnittstelle
- Sicherheitsklassifizierung III (FL) gemäß DIN 12876
- Bedarfgesteuertes Kühlaggregat
- Natürlichhes Kältemittel R290
- Drehzahlgeregelte Pumpe aus PEEK
- Digitale Füllstandsanzeige
- Integrierter Einfülltrichter und Ablassventil zur sicheren und sauberen Handhabung des Thermofluids
- 2,5 l Thermofluid sind ohne Nachfüllen verfügbar
- Leicht zu reinigender Maschen-Luftfilter aus Edelstahl
- Einstellbarer Temperatur-Sicherheitskreis
- RS 232- und USB-Schnittstelle
- Sicherheitsklassifizierung III (FL) gemäß DIN 12876
Properties
| Cooling capacity at 20 °C: | 620 W |
|---|---|
| Ext. depth: | 525 mm |
| Ext. height: | 480 mm |
| Ext. width: | 220 mm |
| External dimensions (WxDxH): | 220 x 525 x 480 mm |
| Heating capacity: | 1500 W |
| IP code: | IP 21 |
| Manufacturer Article Number: | 0020128734 |
| Max. delivery pressure: | 0.5 bar |
| Max. flow rate: | 21 l/min |
| Max. suction pressure: | 0.25 bar |
| Max. temperature: | 100 °C |
| Max. voltage: | 230 V |
| Max. volume bath: | 4 l |
| Min. temperature: | -30 °C |
| Min. volume bath: | 1.4 l |
| Plug type: | EU |
| Power supply: | 230 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Refrigerant: | R290 |
| Temperature: | -30 ... 100 °C |
| Temperature stability: | ±0,1 K |
| Type: | HRC 2 GREEN basic |
| Type of auxiliary energy: | Mains connection |
| Volume bath: | 1.4 ... 4 l |
| Weight: | 26 kg |
Skip product gallery
Water bath preservative liquid Aqua Stabil
From
CHF 34.30*
Refrigeration Bath circulators to -55°C
From
CHF 13,250.00*
Refrigerated Circulators with Advanced Programmable (AP) Temperature Controller
From
CHF 7,770.00*
Refrigerated Circulators with Standard Digital (SD) Temperature Controller
From
CHF 5,145.00*
Refrigerated Circulators with Advanced Digital (AD) Temperature Controller
From
CHF 6,290.00*
Refrigerated circulators DYNEO™ DD
Price on request
Refrigerated circulators DYNEO™ DD, with analogue interface
Price on request
Refrigerated circulators DYNEO™ DD, with RS232 interface
Price on request
Refrigerated / heated circulatores CBC 5 control
From
CHF 9,052.00*
Similar products
Prevents build-up of algae and bacteria in bath tanks providing hygienic operationNo contamination of the tank or immersion thermostat componentsEconomical - only 2 ml of Aqua Stabil is required for every 1 litres of waterRemains effective for weeks, as shown by colour indicator.Use biocides safely. Always read the labelling and the product information before use.
Compact design and high cooling capacity at low temperatures.Option: Natural refrigerant available on requestHeating capacity
CC-505 / CC-505wl:
CC-508 to CC-525w:
1.5 kW
3.0 kWPump data CC-505 to CC-525w
Max. pressure:
Max. suction:
25 L/min / 0.7 bar
18.5 L/min / 0.4 barSupply requirement
CC-505 to CC-508w:
CC-510 to CC-525w:
230 V / 50 Hz
400 V / 50 HzTemp. stability acc. to DIN 12876:+/-0.02 K*with displacement insertFunction version available by E-grade.
The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: From -40° up to +200°CTemperature Stability: ±0.005°CTime/temperature programmingIntuitive 4.3" (10.9 cm) SmartTouch display11 languages: French, German, Spanish, Chinese, Arabic, English, Portuguese, Russian, Hindi, Italian, KoreanVariable speed pump with open- and closed-loop external circulation capabilityPump pressure max. 3.6 psi (0.25 bar)On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, remote on/off and external temperature probeEvent scheduling (time and date) with real-time clockReview temperature trends for up to 10 daysMultiple selectable "home" screensOn-screen helpAutomatic and/or user-adjustable performance optimizationSafety class III10-point calibration capability
The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: From -30° up to +170°CTemperature Stability: ±0.04°CLarge 3.75" universal icon and English displayPressure Pump with two speedsPump pressure max. 2.9 psi (0.20 bar)On-board connectivity: RS-232 serial outputAdjustable over- or under-temperatureAutomatic performance optimizationSafety class ISingle-point calibration capability
The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: From -40° up to +200°CTemperature Stability: ±0.01°CIntuitive 3.75" (9.5 cm) display with touch-pad control4 languages: French, German, Spanish, EnglishPump speed variable external temperature control capabilityPump pressure max. 3.6 psi (0.25 bar)On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probeAdjustable over- or under-temperatureOn-screen promptsSafety class IIISingle-point calibration capability
Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.3.5" TFT colour display with multilingual user interfaceIntegrated programmer for 8 x 60 program stepsEasy pump switching between internal and external circulationExternal pump connections (M16x1)Infinitely adjustable pressure pumpUSB connectionSpace-saving cooling coil design yields more usable space in the bath tankExternal Pt100 connectionStainless steel bath tank including bath lid and drain tapRemovable ventilation grid2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.3.5" TFT colour display with multilingual user interfaceIntegrated programmer for 8 x 60 program stepsEasy pump switching between internal and external circulationExternal pump connections (M16x1)Infinitely adjustable pressure pumpUSB connectionSpace-saving cooling coil design yields more usable space in the bath tankExternal Pt100 connectionStainless steel bath tank including bath lid and drain tapRemovable ventilation grid2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1
Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.3.5" TFT colour display with multilingual user interfaceIntegrated programmer for 8 x 60 program stepsEasy pump switching between internal and external circulationExternal pump connections (M16x1)Infinitely adjustable pressure pumpUSB connectionSpace-saving cooling coil design yields more usable space in the bath tankExternal Pt100 connectionStainless steel bath tank including bath lid and drain tapRemovable ventilation grid2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1Analogue interface
Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.3.5" TFT colour display with multilingual user interfaceIntegrated programmer for 8 x 60 program stepsEasy pump switching between internal and external circulationExternal pump connections (M16x1)Infinitely adjustable pressure pumpUSB connectionSpace-saving cooling coil design yields more usable space in the bath tankExternal Pt100 connectionStainless steel bath tank including bath lid and drain tapRemovable ventilation grid2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1RS232 interface
Powerful circulators with strong heating and cooling power for operating temperatures from -25 °C to 200 °C. With speed-controlled pressure and suction pump, suitable for external applications. Very good thermal insulation, therefore particularly fast heating-up times and low heat input at low temperatures. All parameters can be read, monitored and documented via software.Connection for external Pt100 temperature sensor and external solenoid valves via Multi I/O connectionVisual and audible warning functionsUSB/RS 232 interfaceSafety drain valveAdjustable safety circuitCalibration optionWith removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood
