Skip to main content Skip to search Skip to main navigation
Menu

Photometer MD50

Description
Scope of supply: Photometer, 3 x 24 mm round glass cuvettes with lid and sealing ring, screwdriver, 3 x stirring rods, 10 ml syringe, cleaning brush, USB-C to USB-A cable, carrying case, 2 x AA batteries, operating instructions, reagents (depending on variant)

Hazardous Substance Data
GHS
colorpickercolorpickercolorpicker
Signal word
Gefahr
H-Satz
H302, H318, H361d, H314, H412, H315
P-Satz
P280, P201, P305+P351+P338, P308+P313, P405, P301+P330+P331, P303+P361+P353, P304+P340, P310, P261, P302+P352, P332+P313
SDS
Link
Properties
Battery/rechargeable battery: 2 x AA
Depth: 155 mm
Description: Urea, liquid reagents
Designation ANSI: AA
Dimensions (WxDxH): 76 x 155 x 45 mm
GHS: GHS05, GHS07, GHS08
Height: 45 mm
IP code: IP 67
Manufacturer Article Number: 280160
Max. permitted ambient temperature: 50 °C
Max. relative humidity rate: 95 %
Measuring range: 0.1 ... 2.5 mg/l CH4N2O0.2 ... 5 mg/l CH4N2O
Min. permitted ambient temperature: 5 °C
No. of batteries/rechargeable batteries: 2
Permitted ambient temperature: 5 ... 50 °C
Type: MD50
Type of auxiliary energy: Battery
Width: 76 mm
Skip product gallery

Accessories

Tintometer GmbH

Tintometer GmbH
Accessories for Lovibond® photometers
From CHF 4.20*

Tintometer GmbH

Tintometer GmbH
Cuvettes for photometers
From CHF 5.70*

Tintometer GmbH

Tintometer GmbH
Cuvette stand, acrylic glass
Cuvette stand for 6 round cuvettes with a diameter of 24 mm. The cuvettes can be placed safely without slipping or tipping over. The transparent acrylic glass allows to observe changes and colour changes unobstructed.
From CHF 38.40*

Tintometer GmbH

Tintometer GmbH
USB-C cable
USB-C cable for easy data transmission to a PC.
From CHF 39.10*
Skip product gallery

Similar products

Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
From CHF 107.20*

Tube tests NANOCOLOR® ortho- and total Phosphate
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
From CHF 133.40*

Tube tests NANOCOLOR® COD
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.DIN ISO 15705
From CHF 114.60*

Photometers MD 100
The Lovibond® MD 100 Photometers are designed for analysis of different parameters in drinking water, industrial process water and waste water. With a total of more than 30 different types, instruments are available for routine testing as well as for special applications. The MD 100 uses high quality interference filters with long-life LEDs as a light source without any moving parts in a transparent sample chamber. The units supply accurate, reproducible results very quickly. Other major advantages include ease of operation, ergonomic design, compact dimensions and safe handling. Provided with calibration and software-based adjustment options the MD 100 is suitable for use as a testing instrument. The tests are conducted using either Lovibond® tablet reagents with long-term stability and a shelf life of 5 or 10 years, VARIO powder reagents or using liquid reagents.Optics: High-quality Interference FiltersWavelength accuracy: ±1 nm.Power supply: 4 micro batteries (AAA), capacity approx. 17 hours or 5000 tests.Automatic switch-off.LCD Display (backlit on keypress).Internal ring memory for 16 data sets.Dimensions (L x W x H): 155 x 75 x 35 mm.Scope of supply: Photometer in a plastic carrying case, with reagents for 100 tests, cells, batteries and standard accessories.Optional: IRiM - infrared interface module for data transfer to computer or printer.*Delivery without reagents for measuring range 0.1 - 10 mg/l Cl2.**24mm diam. glass cell***10mm diam. multi cell-2
From CHF 508.00*

pH electrodes, starter kit, for PrimeLab 2.0
For pH measurements of water solutions in research, environmental monitoring and quality control.With integrated temperature sensorNot refillableAutomatic recognition of connected electrodesSynchronisation via LabCOM®, LabCOM® Cloud (optional and free of charge)ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0Scope of supply:pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual
From CHF 758.00*

Conductivity cell probes, for PrimeLab 2.0
For conductivity measurements in the laboratory.With integrated temperature sensorFor connecting to the ProbeBOX 1.0
From CHF 270.00*

pH electrodes for PrimeLab 2.0
For pH measurements of water solutions in research, environmental monitoring and quality control.Not refillableWith integrated temperature sensorFor connecting to the ProbeBOX 1.0
From CHF 270.00*