Tubes

VITLAB GmbH

Wide-mouth bottles with screw thread, PFA

Transparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.

From CHF 185.00*

Thermo Elect.LED GmbH (Nalge)

Narrow-Mouth Bottle Nalgene™ Teflon™ PFA, with screw cap

Chemical and corrosion resistantTemperature resistant from -270 to +250 ° CLeak-proof Teflon ™ PFA screw capsAutoclavable

From CHF 60.70*

Thermo Elect.LED GmbH (Nalge)

Narrow-mouth bottles Nalgene™ Type 1600, FEP with screw cap ETFE

Transparent. Teflon® FEP bottle with leakproof Teflon® ETFE screw cap. Highly resistant to chemicals, corrosion and temperature. Autoclavable - cap should be unscrewed and sat loosely on neck before autoclaving.Teflon® and Tefzel® are registered trademarks of DuPont.

From CHF 53.00*

VITLAB GmbH

Volumetric flasks, PFA, class A, with screw cap

Highly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials

From CHF 188.60*

Metrohm Deutschland

Stoppers with perforation , PP

For IC Sample Processors.

From CHF 1,775.00*

Metrohm Deutschland

Sample tubes, PP

For IC Sample Processors and VA Autosamplers.

From CHF 474.00*

VITLAB GmbH

Griffin beakers, PFA

Transparent. With a raised scale. Excellent chemical resistance and very high thermal stability from -200°C to +260°CAutoclavable at 121°C (2 bar) according to DIN EN 285.The advantages of PFASpecially suitable for use in trace analysisIdeal for sensitive and valuable samplesLong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesChemical inertness against nearly all chemicalsGood transparency and dimensional stabilityEasy to cleanUse of high purity raw materials

From CHF 30.00*

VITLAB GmbH

Sample jars with screw cap, PFA

With screw cap made of PFA. Cylindrical, tall shape.Ideal for sample collection, transport and storage of samples.The advantages of PFASpecially suitable for use in trace analysisIdeal for sensitive and valuable samplesLong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive, smooth surfacesHigh thermal stability from -200°C to +260°C, autoclavable at 121°C (2 bar) according to DIN EN 285Chemical inertness against nearly all chemicalsGood transparency and dimensional stabilityEasy to cleanUse of high purity raw material

From CHF 65.10*

VITLAB GmbH

Round-bottom flasks, PFA

Transparent, neck with NS 29/32. Suitable as safety flask for use with rotary evaporators to collect the distilled off liquid. High thermal stability and chemical resistance.The advantages of PFA:Especially suitable for use in trace analysisLong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200 °C to +260 °C, autoclavable.Chemical inertness against nearly all chemicalsGood transparency and dimensional stabilityEasy to cleanUse of high purity raw materials

From CHF 133.00*

VITLAB GmbH

Sample vials, PFA, outer base flat

Sample vials made of PFA with conical interior and raised graduation. Rounded base on the inside. Both 50 ml sizes fit in common Autosampler racks.Scope of delivery is without screw cap. Please order the screw cap separately.

From CHF 35.80*

LLG Labware

LLG-Beakers, low form, PTFE

Manufactured from high quality PTFE with excellent resistance to all chemicals. Manufactured from molded, pure PTFE with a smooth internal finish. Flat base enables a flat contact to the surface for effective heat transfer. PTFE beakers have excellent resistance to chemicals and temperature stability from -200°C to +260°C.

From CHF 22.70*

Bohlender GmbH

Micro gas wash bottle, PFA

For use with small volumes up to 50 ml. The gas inlet tube (not included, please choose a hard-walled tubing) is inserted through the fitting on the top and can be fixed safely. The side fitting is used as gas outlet.Temperature resistant from -200 to 250 °CFDA conformNon-porousCan also be used as cold trap.Only suitable for presureless operation

From CHF 588.00*

BRAND GMBH + CO.KG

Screw caps S 40, PFA

For wide-mouth PFA bottles.

From CHF 42.00*

BRAND GMBH + CO.KG

Narrow-mouth wash bottles, Technical quality PFA

These bottles include components made of reprocessed PFA material from our production process. The tip opening can be enlarged by cutting.High temperature and chemical resistanceETFE screw capsFEP tube

From CHF 151.50*

BRAND GMBH + CO.KG

Wide-mouth bottles, PFA

For long-term storage of solvents and standards (trace analysis).PFA screw cap with integrated seal lip and buttress threadTemperature resistant from -200 ºC to +260 ºCAutoclavable

From CHF 164.50*

Thermo Elect.LED GmbH (Nalge)

Dropper bottle Nalgene™ Type 2414, FEP/ETFE

Teflon® FEP bottle with Tefzel® ETFE dropper and cap. Excellent chemical resistance. Autoclavable.Teflon® and Tefzel® are registered trademarks of DuPont.

From CHF 90.90*

VITLAB GmbH

Gas washing bottles, PFA

With cap with S40 screw thread and srewable frit made of PTFE. Approx. pore size 3 µm for optimal formation of gas bubbles into the liquid. Because all parts are made of high-quality fluorocarbon resins, a broad range of applications are possible. The threaded inlet and outlet connections accept 4 x 6mm i.d. x o.d. tubing , (1000 ml version: 5 x 8mm i.d. x o.d. tubing).

From CHF 624.00*

VITLAB GmbH

Sample tubes, PFA, without ring mark and closure

Tube for sample preparation and for use in autosampler racks. Tube for sample preparation and for use in autosampler racks.

From CHF 51.10*

VITLAB GmbH

Sample tubes, PFA, with ring mark and screw cap

Tube for sample preparation and for use in autosampler racks. Tube for sample preparation and for use in autosampler racks.

From CHF 120.00*

VITLAB GmbH

Sample tubes, PFA, with ring mark and stopper

Tube for sample preparation and for use in autosampler racks. Tube for sample preparation and for use in autosampler racks.

From CHF 62.30*

VITLAB GmbH

Narrow-mouth bottles with screw thread

PFA. Transparent, with tightly sealing screw closure (saw-tooth thread). High temperature resistance from -200 to +250°C. Autoclavable at 121°C (2 bar) according to DIN EN 285.

From CHF 100.00*

Bohlender GmbH

Round bottom flasks with GL threaded necks

Non-porous PFA (PFA fluoroplastic). With a central cone joint socket and GL threaded side necks as indicated, to accommodate heat sensors, electrodes or tubing. Vacuum-compatible under certain onditions. e.g. at 30 mbar pressure and 50°C max. temperature.For simple connection of tubing, we recommend the Bola laboratory screw fitting, which must be ordered separately (please ensure the correct size fitting is ordered for the tubing bore required).(Bola item numbers D 590 / D 593 / D 631 / D 632).

From CHF 704.00*

Saint Gobain

Watch Glasses, PTFE

This ultra-shallow, concave dish is ideal for holding, weighing, crystallizing, evaporating and drying small samples of liquids, powders and solids. It can also be used as a convex cover for beakers and Erlenmeyer flasks to limit airborne contaminants, while still allowing gas exchange. All sizes are molded to the same contour for easy stacking. Shatter-proof PTFE material is chemical resistant and easy to clean.Inert, chemically resistantSmooth and unbreakableUse as beaker covers

From CHF 43.00*

Saint Gobain

Test Tubes, PFA, with cap

These unbreakable test tubes are excellent for trace metal analysis. They are inert, non-contaminating, and transparent for easy viewing of contents. They withstand temperature extremes. Can be sterilized repeatedly.Low metal ion contentInert

From CHF 210.00*

Saint Gobain

Test Tubes, PFA

From CHF 100.50*

Saint Gobain

Wash bottles, PFA

These wash bottles feature a wide-mouth opening for convenience in filling and pouring of all types of liquids. Non-stick and easy to clean, fluoropolymer construction provides superior flex life and mechanical strength. As PFA contains the lowest concentration of trace metal ions of all fluoropolymers, these bottles are ideal for ultra-pure applications and environmental work.Wide-mouth for easy fillingChemically inert and leak-proofFlexible nozzle with 360° swivel; small orifice allows accurate content dispensingTransparent and break resistantMolded-in graduation marks

From CHF 253.00*

Saint Gobain

Jars, PFA

PFA jars store solutions, paste and bulk materials with no concern about leaching, corrosion, contamination or evaporation. They are resistant to corrosive liquids, acids, solvents, sensitive reagents, and staining solutions. PFA jars feature a large mouth for easy access and non-stick surface for easy cleaning. There is an area for identification marking on the side of the jars. Stackable, these jars have a knurled top for secure grip to facilitate easy opening and closing.Chemically resistantUltra-pureHeat resistant and usable to cryogenic temperaturesSecondary inner seal design for safety and integrityIdeal for storing digestion samples

From CHF 103.00*

Saint Gobain

Measuring cylinders, graduated, PFA

These graduated cylinders offer all the advantages of non-stick inert fluoropolymers. PFA is temperature resistant from -196°C to 260°C and has the lowest metal ion content. As a result, Chemware® cylinders are excellent for trace metal analysis.Easy-to-read graduationsSmooth pouring, drip-free spoutBroad base for stability

From CHF 645.00*

Saint Gobain

Evaporating Dish, PTFE

This PTFE Evaporating Dish can be used to concentrate a solution or to create solid precipitates. The evaporating dish can also be used as a shallow bath, as a drying dish or as a beaker cover to protect contents from dust and other contaminants. PTFE material is unbreakable, chemically inert, and withstands temperatures up to 288°C. The non-stick surface is stain resistant and easy to clean. Features a broad spout for easy pouring.Chemically inertIdeal for ultra-pure samplesWithstands temperatures up to 288°C

From CHF 107.00*

Saint Gobain

Evaporating Dish, PFA

The PFA Evaporating Dish design promotes evaporation of excess fluids to produce a concentrated solution or solid precipitate. The flat bottom provides good surface contact with a heat source, while the non-stick angled walls direct fluids to the base, which limits condensation on the dish wall. This PFA dish can be used in a wide range of temperatures, from cryogenics to 260°C. The dish is also ideal for holding solid samples or small volumes of liquid. Features a broad spout for easy pouring.Chemically inertIdeal for trace metal analysisTransparent for easy viewingPerfect for microwave useSmooth, non-stick surface

From CHF 65.70*

Saint Gobain

Wide-mouth bottles with cap, graduated, PFA

These PFA graduated bottles have a convenient wide-mouth opening for easy filling and pouring. These unbreakable, chemically inert bottles can be used for storage of virtually all corrosive chemicals. PFA material is heat resistant, non-stick and easy-to-clean. Each includes a PFA cap with an inert fluoropolymer cap liner to ensure leak-proof sealing. Ideal for environmental sampling, or for storage in pharmaceutical and intermediate-stage semiconductor processing applications.Wide-mouth for easy fillingUltra pure and chemically inertNon-stick and easy-to-clean

From CHF 236.00*

Saint Gobain

Narrow-mouth bottles with cap, PFA

These unbreakable PFA bottles can be used for storage of virtually all corrosive chemicals, including hydrofluoric, nitric, and perchloric acids. PFA bottles are chemically inert, heat resistant with a non-stick, easy-to clean surface and are ideal for environmental sampling. The inert fluoropolymer cap liner ensures leak-proof sealing. Supplied with PFA caps.Ultra-pure, the lowest metal ion content of all fluoropolymersUnbreakableChemically inertNon-stick, easy to cleanUse for storage in pharmaceutical and semiconductor processing (intermediate stages)

From CHF 113.00*

Saint Gobain

Beakers, Griffin, PFA

Griffin Beakers, PFA have a specially machined bottom designed for rapid, efficient heat transfer. They are transparent for easy viewing and graduated for easy measuring. They feature a non-stick, easy-to-clean surface.Can be heated up to 260°C and used in a microwaveIdeal for ultra-pure applicationsLow metal ion content for trace metal analysis

From CHF 56.90*

Saint Gobain

Griffin Beakers, PTFE

Griffin Beakers, PTFE are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 288°C when proper care is exercised. The specially molded bottom allows rapid heat transfer.Can be heated to 550°F (288°C) and used in a microwaveChemically resistant to acids and basesUltra-pure

From CHF 65.20*

VITLAB GmbH

Evaporating Dish PFA, with snap-on lid, PE

With snap-on lid, PE. For contamination free sample preparation and efficient transportation. Due to a conical depression in the middle of the base very small amounts of a solvent are adequate to absorb the evaporated samples.

From CHF 68.80*

VITLAB GmbH

Screw caps for sample vials, PFA

From CHF 32.90*

Filter products