Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.For Reaction tubes:For homogenisation of cells, tissues or foodstuffs / feed samples.For tubes with 0.5 ml, 1.5 ml, and 2.0 mlCan be cooled down to -196 °CSterilisable in an autoclave or dry heat at 200 °CSuitable for PCR applicationsAlternative to single-use plastic pestlesPerfectly suitable for Eppendorf Safe-Lock Tubes

Autoclavable. Suitable for battery-operated drive motor.

Autoclavable. Suitable for battery-operated drive motor.

For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.

Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:For pre-grindingFor fine grindingSpare components are available and are completely interchangeable.

Suitable if the nuclei are to be maintained after homogenising.

For safety grinding of any cells by minimal temperature rising. Closed System (CS) for minimizing the risk of personal contact with aerosols and sample overflow while grinding. Optimal contact of grinder and conical sample tube (15 or 50ml) to grind each cell in the best way.Each unit is gamma sterilized and comes with a fully assembled pestle , conical sample tube (PP), solid top cap (HDPE) and label.Type CS1: Tip from glass-filled PP (30%/70%) for standard grindingType CS2: Vitrified tip (cast silica) for harder grinding

The pestles are conicaly shaped at the tip and cylindrically shaped in the upper part. This combination gives two separate areas, one for initial grinding and a second for final homogenisation.

The all-glass Uni-Form range of round body tissue grinders is made from sterilisable heat-resisting glass in capacities 5ml to 55ml. Models are available with rod ends for motor drive, or hollow pestles designed for use with coolants/dry ice. Bodies are available in clear precision glass or ground glass for more effective homogenisation of tougher tissues.Grinding clearance pestle and mortar 0.152mm to 0.254mm.

For grinding bacterial emulsions and tissues. Rounded pestle and mortar ends, ensure perfect grinding. Autoclavable. Large Griffiths tube is ideal for coarse material.

Manufactured from high quality borosilicate glass this range of mini homogenisers is ideal for micro tissue work. Bodies are clear precision glass. Pestles have ground glass working length. With or without handles. Fully autoclavable.Grinding clearance pestle and mortar 0.152mm to 0.254mm.

Supplied complete with a PTFE pestle, stainless steel handle and borosilicate glass mortar which is stoppered in PTFE to protect against splash back during the grinding process. Autoclavable.

For resuspending pellets and homogenising within tubes (1.5, 2.0ml, exact fit). Autoclavable. Suitable for homogeniser/motor drive.

Reusable, for 500µl and 1.5ml reaction tubes. Autoclavable CTFE / stainless steel. Suitable for battery-operated drive motor (9.314 496).

With PTFE pestle and glass mortar. Sizes 21 and 24 have notches on the bottom edge of the pestle so that particles can be transported up to the cylindrical part of the mortar for extraction. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.

All-glass. Pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.

With conical and cylindrical area for effective tissue for homogenising. The PTFE pestle is ideal for soft tissue such as brain or liver. The pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.

With conical and cylindrical area for effective tissue for grinding and also for homogenising. Especially suitable for cellular tissue such as muscle, heart and lungs. The pestle is sufficiently stable to be motor driven. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.

Potter Elvehjem & Dounce. Safe homogenisation without much effort, for gentle digestion of biological samples and tough, difficult to homogenize material, so that a high proportion of intact cell nuclei can be isolated.Large stability, vibration-free due to robust 3-fold stand construction4-digit display for reproducible homogenisationEasy handlingSteplessly adjustable, electronic speed control from 40 - 3000 min-1 High torque drive, powerful even at low speedsFlexible useLarge selection of conical and cylindrical homogenizers and pestle (PTFE, glass and also glass fibre reinforced)Tubes with volumes from 1.5 to 40 ml and outer diameters from 10 to 40 mm can be usedUse of Eppendorf® microreaction vessels with 1.5 ml possibleChuck with hollow shaft for quick and easy pestle change and the use of different shaft lengths and diametersFor optimum cooling, the cooling vessel can be filled with ice or ice waterSupplied with: schuett homgenplus homogeniser drive unit with universal keyless chuck, incl. cooling vessel, 1000 ml and universal chuck set (consisting of 6 sizes).We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.

Glass. Suitable if the nuclei are to be maintained after homogenising.

Glass. Suitable if the nuclei are to be maintained after homogenising.

For use with all homogeniser drive-units or for schuett homgenplus.Homogenisers and pestles provide a precise shape and are consequently separately exchangeable. Clearance between pestle and homogeniser is between 0.18 and 0.23 mm.Homogeniser with PTFE pestleTapered or cylindrical. Shaft made of stainless steel. Inert. Elastic. With smooth, wax-like, moisture-rejecting surface. Resistant against high temperatures. Also available as glass fiber reinforced model. Highly efficient with especially tough tissue.Homogeniser with glass pestleTapered or cylindrical. With robust glass shaft. Ground-glass surface in cylindrical/tapered part. Highly efficient with tough tissue.Homogenizers and pestles also available individually as spare parts.Glass mortar Type 1:With flared overflow neck and spout, conicalGlass mortar Type 2:Without flared overflow neck, cylindricalGlass mortar Type 3:With flared overflow neck and spout, cylindricalGlass mortar Type 4:Round bottom, with flared overflow neck, without spout, cylindrical*glass-fibre reinforced

Autoclavable micro-pestle for re-suspending pellets in 1.5 to 2.0 ml containers.

Potter-elvehjem homogenisers are designed to work with soft tissuePrecision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityPTFE PestleStandard stainless steel rod for use with an electric motorOptional stainless steel handle for manual grindingAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.076 to 0.126mm

Precision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityBorosilicate glass pestleAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.152 to 0.254mm

PTFE. With stainless steel shaft diam. 3.2 mm. For 1.5 ml reaction tubes.Ideal for re-suspending lyophilized products or precipitates, and for homogenizing samples in a microcentrifuge tube. Overall length 143 mm Steam autoclavable at 121 ºC. May be hand-held or mounted in a motorized chuck.

*glass-fibre reinforced