Measuring cylinders

ISOLAB Laborgeräte GmbH

Measuring cylinders, PP, tall form, class B, blue graduated

Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.

From CHF 2.90*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, tall form, class B, amber graduation

Silberbrand Eterna. To DIN EN ISO 4788. With spout and hexagonal foot. Graduations and inscriptions in Eterna permanent amber stain. Calibrated to contain (IN).

From CHF 13.40*

ISOLAB Laborgeräte GmbH

Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated

Conformity certified with batch IDDIN EN ISO 4788Hexagonal foot with spoutCalibrated to contain (IN)Inscriptions are printed with blue enamelBatch certificate can be downloaded from website

From CHF 10.30*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class B, blue graduation

IN (TD) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.

From CHF 11.60*

BRAND GMBH + CO.KG

Graduated cylinders, PP, tall form, class B, embossed scale

Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)

From CHF 4.10*

VITLAB GmbH

Measuring cylinders, PP, tall form, class B, blue moulded graduations

Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.Food-safe product according to regulation (EU) No. 10/2011.

From CHF 2.95*

Hirschmann Laborgeräte GmbH

Measuring cylinder with plastic socket, DURAN®, class A, blue graduation

With spout, removable plastic socket and protective ring. Blue graduation marks, calibrated for IN, acc. to DIN EN ISO 4788.

From CHF 12.00*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class A, blue graduation

IN (TD) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available. Also available with dated batch identfication acc. to USP (US Pharmacopeia).

From CHF 14.30*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, low form, class B, amber graduations

Silberbrand EternaDIN EN ISO 4788With spout and hexagonal footGraduations and inscriptions in Eterna permanent amber stainCalibrated to contain IN

From CHF 13.10*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, low form, class B, amber stain graduation

IN (TC) calibrated. With spout and hexagonal glass base. Tolerances better than class B requirements. Short line graduation. With durable amber stain graduation, DIN EN ISO 4788.

From CHF 12.20*

ISOLAB Laborgeräte GmbH

Measuring cylinders, Borosilicate glass 3.3, tall form, class B, white graduation

Flawless spout design assures pouring without any drips. Thick and durable polypropylene base reduces the risk of breakage during use and cleaning. Base perfectly fits the cylinder body and can easily be dismantled.

From CHF 15.20*

BRAND GMBH + CO.KG

Measuring cylinders, PMP, tall form, class A, blue graduations

Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60 °C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.DIN 12681 and ISO 6706DE-M markingWith blue printed graduations and inscriptions

From CHF 13.00*

Hirschmann Laborgeräte GmbH

Measuring Cylinder with Plastic Socket, DURAN®, class B, Blue Graduation

With spout, removable plastic socket and protective ring, graduation marks, calibrated for IN, DIN EN ISO 4788.

From CHF 10.00*

Kartell S.p.A.

Measuring cylinders, PMP, tall form, class B, white graduations

Clear. Conforms to ISO 6706 - 1981 (E).Good chemical resistanceFor liquids up to 170 °CPentagon baseFood-safeAutoclavable

From CHF 4.60*

LLG Labware

LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class A

Tall form. Conformity certified with batch ID.DIN EN ISO 4788With hexagonal base and spoutBlue graduation

From CHF 24.70*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated

With spout, tall form. Blaubrand®. To DIN EN ISO 4788.DE-M marking with works certified batch number. With spout and hexagonal foot. Graduations and inscriptions in highly contrasting blue enamel. Calibrated to contain (IN). All Blaubrand® cylinders are delivered with batch number and batch certificate. Also available with individual works, USP, or DAkkS (former DKD) calibration certificate on request. The batch certificate is also available to download from the manufacturer's website.

From CHF 16.30*

VITLAB GmbH

Graduated cylinders, PP, class B, low form, raised scale

Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

From CHF 3.40*

ISOLAB Laborgeräte GmbH

Measuring cylinders, PP, tall form, class B, moulded graduations

Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.They offer high transperency, chemical resistance and remarkable heat tolerance.They meet the highest quality standards according to DIN 12681 and ISO 6706.Individually calibrated through automatic calibration process carried out by robots.Permanent quality control through all steps eliminate possible deviations from nominal values.Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards.Graduations are embossed and specially designed for plastic and resistant to 60°C.For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under direct sunlight or overheated conditions.

From CHF 1.90*

DWK Life Sciences GmbH (Duran)

Measuring cylinders DURAN®, tall form, class A, blue graduations

Calibrated to contain (IN). With spout, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer's website.

From CHF 16.60*

Thermo Elect.LED GmbH (Nalge)

Measuring cylinders Nalgene™, PP

Transparent. Lightweight construction. Class B. Fulfil requirements of ISO 6706. Large, round foot with moulded rib for stability. Non-wetting. Calibrated to contain / deliver at 20°C.

From CHF 7.30*

Kartell S.p.A.

Graduated cylinders, PP, class B, embossed scale

Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.

From CHF 5.20*

LLG Labware

LLG-Measuring cylinders, borosilicate glass 3.3, low form, class B

Low form. Calibrated to contain (TC, IN).DIN EN ISO 4788With hexagonal base and spoutAmber graduation

From CHF 17.30*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, tall form, class B, amber graduation

Silberbrand Eterna. To DIN EN ISO 4788. With spout and hexagonal foot. Graduations and inscriptions in Eterna permanent amber stain. Calibrated to contain (IN).

From CHF 24.10*

LLG Labware

LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class B

Tall form.Detachable hexagonal baseWith spout and protection collarWhite graduation

From CHF 9.20*

Poulten & Graf GmbH

Measuring cylinders FORTUNA®, borosilicate glass 3.3, low form, class B, amber graduated

With spout.

Price on request

Kartell S.p.A.

Measuring Cylinders, PP, Short Form, Moulded Graduations

Low form, circular base. Excellent chemical resistance. Moulded graduation. Wide base for high stability. Food-safe, autoclavable.

From CHF 3.30*

VITLAB GmbH

Measuring cylinders, PMP, class A, KB

Tall form. Highly transparent. DE-M marked. Ring marks at the major graduation points. The conformity certified cylinders are delivered with a batch certificate which includes batch number and the actual determined nominal capacity with indications of the test conditions. Batch number and year of fabrication is printed on each cylinder. The concluding deviations to the nominal capacity are clearly within the required tolerances of class A acc. to DIN 12681 and ISO 6706. Measuring cylinders made of PMP withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. On request also with DAKKS calibration certificate or single certificate.

From CHF 11.50*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class A, amber stain graduation

IN (TC) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. With durable amber stain graduation, acc. to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.

From CHF 14.20*

Hirschmann Laborgeräte GmbH

Measuring cylinders, DURAN®, tall form, class B, amber stain graduation

IN (TC) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. With durable amber stain graduation, DIN EN ISO 4788.

From CHF 13.80*

Bohemia Cristal

Measuring cylinders, borosilicate glass 3.3, tall form, class A, brown graduation

With spout and hexagonal base. ISO 4788.

From CHF 11.50*

VITLAB GmbH

Measuring cylinders, PP, tall form, class B, moulded graduations

Tall form. Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

From CHF 3.20*

Hirschmann Laborgeräte GmbH

Measuring Cylinder, DURAN®, class A, Blue Graduation

Schellbach stripe for enhanced legibility and exact meniscus configuration, acc. to DIN EN ISO 4788. Calibrated for IN.Certified conformityWith dated batch identificationMain point ring graduationWith spoutHexagonal glass socketAdditional batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.

From CHF 19.00*

BRAND GMBH + CO.KG

Measuring cylinders USP, borosilicate glass 3.3, tall form, class A, blue graduated

DIN EN ISO 4788, DE-M marking. Calibrated to contain (IN). Ring marks at major graduations. Marks and inscriptions in high contrast blue enamel. With spout and hexagonal base. Incl. USP batch certificate. On request, also available with USP individual certificate.

From CHF 33.30*

BRAND GMBH + CO.KG

Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated

From CHF 29.40*

VITLAB GmbH

Measuring cylinders, SAN, low form, class B, moulded graduations

Short form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

From CHF 5.00*

DWK Life Sciences GmbH (Duran)

Measuring cylinders, DURAN® SUPER DUTY, low form, class B, white graduation

Hexagonal base.

From CHF 129.00*

Filter products