Round-bottom flasks, PFA | Volume ml: 100

Transparent, neck with NS 29/32. Suitable as safety flask for use with rotary evaporators to collect the distilled off liquid. High thermal stability and chemical resistance.

The advantages of PFA:
  • Especially suitable for use in trace analysis
  • Long-term maintenance of low-concentration reference materials in PFA containers
  • No memory effects
  • Practically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfaces
  • High thermal stability, from -200 °C to +260 °C, autoclavable.
  • Chemical inertness against nearly all chemicals
  • Good transparency and dimensional stability
  • Easy to clean
  • Use of high purity raw materials

colorpicker
Dual Use: 0
Height mm: 117
Manufacturer Article Number: 107797
Volume ml: 100
Ø mm: 65

Other customers also bought

Lenz-Laborglas GmbH & Co. KG
Round bottom flasks with conical ground joint, DURAN®
According to DIN EN ISO 4797 and in addition to DIN standard, with inscription label.
From CHF 8.90*

Accessories

Saint Gobain
Flask support rings, "BiBase", silicone elastomer
Blue. Double sided. Sits firmly on the bench to support round-bottomed flasks.Resistant to oxidation and temperatures from -60 to 200°CVery soft and easy to cleanResistant to chemicalsGood thermal and electric insulationExcellent adhesion with glassNon-slip
From CHF 31.20*

BR Solution GmbH
Flask rings, pressed cork
Height 30mm.
From CHF 3.55*

Kartell S.p.A.
Round bottom flask holder, PP
Provides a secure base for round bottom flasks from 10ml to 10000ml capacity. Autoclavable.
From CHF 22.00*

Similar products

Wide-mouth bottles with screw thread, PFA
Transparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.
From CHF 181.00*

Narrow-mouth bottles Nalgene™ Type 1600, FEP with screw cap ETFE
Transparent. Teflon® FEP bottle with leakproof Teflon® ETFE screw cap. Highly resistant to chemicals, corrosion and temperature. Autoclavable - cap should be unscrewed and sat loosely on neck before autoclaving.* with high form thread.Teflon® and Tefzel® are registered trademarks of DuPont.
From CHF 50.80*

Volumetric flasks, PFA, class A, with screw cap
Highly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
From CHF 185.00*

Narrow-Mouth Bottle Nalgene™ Teflon™ PFA, with screw cap
Chemical and corrosion resistantTemperature resistant from -270 to +250 ° CLeak-proof Teflon ™ PFA screw capsAutoclavable
From CHF 59.70*

Sample tubes, PP
For IC Sample Processors and VA Autosamplers.
From CHF 412.07*

Stoppers with perforation , PP
For IC Sample Processors.
From CHF 1,542.72*

Wide-mouth bottles, PFA
For long-term storage of solvents and standards (trace analysis).PFA screw cap with integrated seal lip and buttress threadTemperature resistant from -200 ºC to +260 ºCAutoclavable
From CHF 161.20*

Narrow-mouth wash bottles, Technical quality PFA
These bottles include components made of reprocessed PFA material from our production process. The tip opening can be enlarged by cutting.High temperature and chemical resistanceETFE screw capsFEP tube
From CHF 148.60*

Autosampler-vials, PFA
Raised graduation with 1 ml subdivisions. Translucent material. Conical interior.Delivered without lids. Please order the fitting lids separately.No memory effectsPractically no carryover due to the extremely hydrophobic, anti-adhesive, smooth surfacesHigh thermal stability, from -200 °C to 260 °CChemical inertness against nearly all chemicalsEasy to clean
From CHF 11.90*