Cell culture bottle 300 cm², PS, with filter cap, PU = 18
TPP Techno Plastic Products AG
CHF 169.00*
Content:
18
323 Available. Delivery time: 1-2 workdays
Product number:
TPP90301
Manufacturer:
TPP Techno Plastic Products AG
Packaging information:
Description
Cell culture bottles from TPP - the safe handling of your cell culture. The yellow original is not only characterized by the specific shape, which guarantees a stable, non -slip stacking behavior of several bottles, but also by the optically appealing labeling option. Label fields are attached on both sides, an advantage not only for left -handed people. Guaranteed accessibility of TPP pipettes and scraps to the corners are further features of the TPP cell culture bottles. The uniform and growth -promoting surface treatment of the growth area as well as the crystal clear transparency rounded off the high quality profile of the product.
Properties
| Cover type: | Filter |
|---|---|
| External dimensions (W x D x H) mm: | 275 x 170 x 50 |
| Volume: | 410 |
| culture surface cm2: | 300 |
| sterile Sub-PK: | 3 |
Skip product gallery
TPP screw cap (thread cap) for TPP cell culture bottles
From
CHF 23.10*
TPP Cell culture bottles with reinforced lid or ripening film
From
CHF 134.00*
Similar products
TPP Vent and filter screw cap for TPP cell culture bottles.
For the closure of your cell culture bottles with or without air supply.
Depending on your cells, you can select the correct cap for you. TPP meets the different requirements of the cell cultures.
Material: PE
Cell culture bottles from TPP - the safe handling of their cell cultures. The reversible lid can be opened several times and closed again. This mechanism enables access from above into the cell culture bottle without movement restriction. Stacking the cell culture bottles is possible with TPP cell culture bottles 150cm². The cell culture bottle has proven itself with a ripening film made of multi -layered foil material. The film is deducted before accessing the bottle. Reding is not possible.
TPP90153 and TPP90653:
TPP cell culture bottle with an optimized opening shape; The design of the cell culture bottle with a ripening film has been further developed and to the version TPP90153 resp. TPP90653 improved. The new opening form and the enlarged sprinkling bottle result in improved sprinkling behavior.
Skip product gallery
LLG-Cryotubes, PP, sterile
From
CHF 39.70*
LLG-Centrifuge tubes economy, PP
From
CHF 122.00*
TPP cell culture test panels
From
CHF 128.00*
TPP vacuum filtration "Rapid" filtermax
From
CHF 94.50*
LLG-Serological pipettes, PS, sterile
From
CHF 79.80*
Customers also bought
With star-shape in the screw cap, for automated capper/decapper.Temperature resistant down to -196 °C. Not appropriate for operations in liquid nitrogen. With marking area, fill line and graduations printed on the vial. Safe and precise handling of biotechnology materials. Bar-code printed on each tube. DNase/RNase free. Vials and caps are autoclavable at 121 °C.Homogeneous conception:All made from polypropyleneSingle-body, single-turn screw capPrinted graduations for accurate measurements. Large white area for writing specimen identification. Sterile.Packed in 2 bags of 50 tubes.For research and development only.
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
The TPP cell culture test plates provide safe handling of their cell cultures.
TPP cell culture test panels made of PS are characterized by the following properties:
Ventilation system in the lid
Growth zone only in the dumplings
A corner of the lid is slightly rounded off, so the lid can only be placed on the test plate in a certain position.
Alphanumeric coordination of the calottes, black embedded.
This vacuum filtration system from TPP provides high yield and a quick filtering of your solution. All TPP vacuum filtration systems of the "Rapid" filtermax family have the same product features:
High flow speed through the 49 cm2, (69 cm2 = 1000 ml), square filter surface.
Low protein binding! The pes filter membrane with pore size of 0.22 ìM is characterized by a low protein binding.
Square shape of the bottle subint as a medium reservoir saves valuable space in the fridge as a warehouse bottle. A single -packed sterile screw cover is supplied with every system.
Ideal shape with rejuvenation results in a secure and non -slip gripping of the system with rubber gloves.
The square shape achieves exceptionally safe stand behavior. This reduces the falling over the unit by the weight of the vacuum tube.
All vacuum filtration systems have a uniform G45 screw cap and can thus be combined with each other
Tip
Serological pipettes from LLG are ideally suited for sterile serological and cell culture applications. Easy to read graduation scales facilitate volume measurement and dosing. All LLG serological pipettes are plugged, sterile, pyrogen-free and have an increased volume capacity through extra graduations.1 ml, 5 ml, 10 ml, 25 ml and 50 ml pipettes contain a bi-directional secondary graduation scale for precise dosingColour coded ringmark for easy volume identificationSingle packed in easy-to-open plastic/paper packagingAlso available as short-pipettes (5 ml, 10 ml and 25 ml) or wide-mouth pipette (10 ml)For research and development only.