Conductivity meter SevenDirect™ SD30-Kit

The meter kits are suitable for measuring the conductivity of samples and can be used in a wide range of laboratory areas.Conductivity meter SD30 with large 7" touch screen and Intelligent Sensor Management (ISM®)Conductivity sensor InLab® 741-ISM with stainless steel shaft and NTC 30 kΩ temperature sensor. The 2-pole measuring cell made of stainless steel is particularly suitable for measuring samples with low conductivityScope of supply: Conductivity meter SevenDirect™ SD30, electrode arm EasyPlace™, conductivity sensor InLab® 741-ISM, 2 conductivity standard sachets 84 µS/cm, protective cover, power supply, get-started-guide

Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and ChinaConductivity:0.00 µS/cm ... 500.0 mS/cmResolution (conductivity):0.01 µS/cm / 0.1 µS/cm / 1 µS/cm / 0.01 mS/cm / 0.1 mS/cmAccuracy (conductivity):±0.5 % of measured valueTDS:0.00 ppm ... 500.0 pptResolution (TDS):0.01 ppm / 0.1 ppm / 1 ppm / 0.01 ppt / 0.1 pptAccuracy (TDS):±0.5 % of measured valueSalinity:0.00 ... 80.0 pptResolution (salinity):0.01 ppt / 0.1 pptAccuracy (salinity):±0.5 % of measured valueTemperature:-5.0 ... 105.0 °CResolution (temperature):0.1 °CAccuracy (temperature):±0.3 °C

Suitable for the following Mettler Toledo instruments:RS-P25, RS-P26, RS-P28: SevenExcellence™, SevenCompact™, FiveEasy Plus™, SevenMulti™RS-P26, RS-P28: SevenGo pro™, SevenGo pro Duo™, Densito, Refracto, SevenEasy™Supplied with: Printer, power cable (country specific), interface cable, paper roll (1 pcs), ribbon cartridge (1 pcs)FeaturesFor modelBuilt-in real-time clock, Zero/Tare key:RS-P26, RS-P28Statistic application, totalling application:RS-P28RS232 Schnittstelle:RS-P25, RS-P26, RS-P28Printer unit:Dot matrix printerRibbon cartridge:Exchangeable, black inkPaper roll:Standard paper 57.5 mm (W), max. Ø 60 mmPrint quality:Thermally stable and lightfast paper (GxP)Interface:RS232C, 9pin male connector or USB* (*SevenExcellence ONLY)Dimensions (W x D x H):120 x 203 x 73mmNet weight:740g (paper roll included)

FiveEasy™ and FiveEasy™ Plus benchtop meters provide high quality conductivity measurements with the simple click of a button. They are the perfect choice for reliable measurement data at a reasonable price.Large, easy to read and easy to understand display with all information visible at a glanceFive self-explanatory buttons making operation simple and easyFast and easy connectivity for simple and secure data transfer (FP only)Electrode arm extension pole includedScope of supply: F30/FP30-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, universal power supply with plug adapter EU and UKF30/FP30-Standard: as F30/FP30-Meter, plus LE703 conductivity sensor, 1 each x 1413 µs/cm and 12.88 mS/cm standard sachetsSpecificationsMeasuring range (Accuracy)Conductivity F30 / FP30:0.01 µS/cm ... 200 mS/cm / 0.01 µS/cm ... 500 mS/cm (± 0.5 % of measured value)TDS F30 / FP30:0.01 mg/l ... 200g/l / 0.01 mg/l ... 300 g/lTemperature F30 / FP30:0 ... 100 °C (0.5 °C) / -5 ... 105 °C (0.3 °C)Calibration F30:1 point, 3 predefined standardsCalibration FP30:1 point, 3 predefined standards, manual cell constant inputInput:Mini-DINTemperature compensation:Linear: 0.00 %/°C ... 10.00 %/°CReference temperature:20 °C and 25 °CPower supply:100 ... 240 V / 50 ... 60 Hz / 12 V DCFP30 onlySalinity:0.00 ... 42 psuMemory:200 measurementsInterface:RS232, USB

Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, conductivity electrode CONSEN9501D, conductivity standard 1413 µS/cm, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and ChinaConductivity:0.00 µS/cm ... 500.0 mS/cmResolution (conductivity):0.01 µS/cm / 0.1 µS/cm / 1 µS/cm / 0.01 mS/cm / 0.1 mS/cmAccuracy (conductivity):±0.5 % of measured valueTDS:0.00 ppm ... 500.0 pptResolution (TDS):0.01 ppm / 0.1 ppm / 1 ppm / 0.01 ppt / 0.1 pptAccuracy (TDS):±0.5 % of measured valueSalinity:0.00 ... 80.0 pptResolution (salinity):0.01 ppt / 0.1 pptAccuracy (salinity):±0.5 % of measured valueTemperature:-5.0 ... 105.0 °CResolution (temperature):0.1 °CAccuracy (temperature):±0.3 °C

A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888.Scope of supply: Conductivity meter, conductivity measuring cell TetraCon® 325, 0.01 mol/l KCl conductivity standard, stand, manual, batteries, universal power supply, CD-ROM with software, USB cable

Conductivity measurement with reliable documentation. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888. An integrated thermal printer (58 mm width) is ready for printout of the measured data.Scope of supply: Conductivity meter with integrated printer, stand, manual, batteries, universal power supply, CD-ROM with software, USB cable

Modular professional system for measurements of pH, redox potential, conductivity, salinity / TDS and ion concentration. Fits up to three modules in any composition and order, can be expanded with additional measurement parameters at any time. Large, high resolution 7'' colour touch display (capacitive), very clear and easy to operateModularity and flexibility; up to 3 measuring modules can work in parallel, expansion to 2 or 3 channels possibleUniversal communication via 2 x USB, Ethernet (LAN) and RS232Plain text user interface in 10 languages with menu guidance in full sentencesOneClick™ operation concept to quickly start frequently used functions and preferred methodsStorage for user methodsHighest security and GxP support (ID protection, sophisticated user management, limits / alarms, integrated radio clock, etc.)Intelligent sensor management (ISM®)Connection of stirrer, sample changer, PC, barcode reader, keyboard, local or network printer possibleStorage up to 20000 data sets (measurements, calibrations, methods)17 predefined, 60 user-defined methodsCalibration: 13 pre-defined and 20 user-defined standardsuPlace™ electrode arm with perfect vertical movementCompatible with all METTLER TOLEDO electrodes (Recommended: ISM® electrodes)Scope of supply: S700-Basic: Includes instrument, 1 x conductivity expansion unit, 2 x blank expansion units, uPlace™ electrode holder, semi-transparent cover, operating instructions, installation and quick guide, LabX® direct pH PC software, declaration of conformity, test certificateS700-Kit: As S700-Basic, but also with InLab® 731-ISM, guide to conductivity measurements, 2 calibration sachets for 1413 µS/cm and 12.88 mS/cmS700-Trace: As S700-Kit but with InLab® Trace instead of InLab® 731-ISM, with Flow-Cell, without calibration sachetsSpecificationsMeasuring range // Resolution // AccuracyTemperature MTC/ATC:-30.0 … 130.0 °C // 0.1 °C // ± 0.1 °CConductivity:0.001 … 999999 µS/cm // 0.001 … 1 // ± 0.5% 0.001 … 2000 mS/cm // 0.001 … 1 // ± 0.5% 0.001 … 200 S/m // 0.0001 … 1 // ± 0.5% 0.001 … 200000 mS/m // 0.0001 … 1 // ± 0.5% 0.1 to 999999 µS/m // 0.001 to 1 // ± 0.5%TDS:0.001 … 1000 g/l // 0.001 … 1 // ± 0.5% 0.001 … 999999 mg/l // 0.001 … 1 // ± 0.5%Salinity:0.01 … 80000 mg/l // 0.01 … 0.1 // ± 0.5%Resistivity:0.01 … 100.0 MΩ x cm // 0.0001 … 1 // ± 0.5% 0.01 … 999999 Ω x cm // 0.01 … 1 // ± 0.5%Conductivity Ash:0.000 … 2022% // 0.001 … 1 // ± 0.5%

Meter for accurate and reliable analysis of conductivity, TDS, salinity, resistivity and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (conductivity, TDS)1- to 2-point temperature calibration1-point salinity calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Conductivity meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China

The conductivity meter SD30 is a robust benchtop device for measuring conductivity, TDS, salinity, resistivity, and temperature.Large 7" touch screen with intuitive user interfaceElectrode arm EasyPlace™ places the sensor preciselyIntelligent Sensor Management (ISM®) ensures the correct use of the connected sensorAutomatic data transfer to PC or printer1 or 2 calibration pointsAdditional splash protection thanks to removable coverGLP compliantScope of supply: Conductivity meter, electrode arm EasyPlace™, protective cover, power supply, get-started-guideConductivity:0 µS/cm ... 2000 mS/cmAccuracy:0.5 % of measured valueTDS:0.00 mg/l ... 1000 g/lAccuracy:0.5 % of measured valueSalinity:0.00 ... 80.00 psuAccuracy:0.5 % of measured valueResistivity:0.00 ... 100.0 MΩ x cmAccuracy:0.5 % of measured valueTemperature range:-30 ... 130 °CAccuracy:±0.1 (0 ... 100 °C)Resolution:0.1 °CIP code:IP54